XUV 855D

The AMS integration kit allows the customer to mount the StarFire™ Receiver and GreenStar™ (GS) display (both receiver and display sold separately) to a Gator™ Utility Vehicle with deluxe cab.

Key features of the AMS integration kit:

• Compatible with StarFire iTC and 3000 Receivers
• Compatible with GS2 1800, GS2 2600, and GS3 2630 Displays
• Receiver mounts to the roof of the deluxe cab
• Switched power to receiver and display allows customer to run the AMS equipment even when the vehicle’s ignition is off. Receiver and display will not turn off when the vehicle’s ignition is turned on and off.

Common applications:

• Boundary mapping
• Flagging field obstacles
• Soil sampling

Compatibility:

• Model year 2011 to current HPX, XUV 625i, 825i, 825i S4, 855D, and 855D S4 Utility Vehicles
• Compatible with deluxe cab
• Not compatible with poly cab

StarFire™ 3000 Receiver and GreenStar™ (GS) installed on XUV 825i

GS installed with tablet mount (sold separately)

The AMS integration kit allows the customer to mount their StarFire receiver and GreenStar display (both receiver and display sold separately) to their Gator Utility Vehicle.

Key features of the AMS integration kit:

• Compatible with StarFire iTC and 3000 receivers
• Compatible with GS2 1800, GS2 2600 and GS3 2630 displays
• GS display mounts to the occupant protective structure (OPS) for convenient access
• Ability to mount receiver to the poly roof, or on the OPS alone
• Switched power to receiver and display allows customer to run the AMS equipment even when the vehicle’s ignition is off.  Receiver and display will not turn off when the vehicle’s ignition is turned on and off.

Common applications:

• Boundary mapping
• Flagging field obstacles
• Soil sampling

Compatibility:

• Model year 2011 to current HPX, XUV 625i, 825i, 825i S4, 855D, and 855D S4 Utility Vehicles
  • If installed on the poly roof, compatible with poly roofs on Model Year 2013 to current Utility Vehicles
• Compatible with full windshield, poly cab
• Not compatible with deluxe cab

The back-up alarm kit alerts pedestrians when the Gator™ is operating in reverse:

• Includes alarm, mounting brackets, wire harness, and reverse switch (if not already installed)
• Conforms to SAE J994 performance specifications for a Type D alarm and is 89 dBA per the SAE specification (measured at 4 ft)

182.9-mm (72–in.) POWERtach blade (shown with optional markers, poly wear bar, and deflector shield)

POWERtach lift components

POWERtach components

Improvements from the previous LP25355 version:

Faster, smoother blade control. Stronger and more powerful with open-loop hydraulics.

Industrial remote control with backlight for easier use in dark conditions. Remote has built-in logic circuit to shut off hydraulics and stop high-amp loading (after 4 seconds function shuts off).

NOTE: It is recommended for best operation that all Gator™ XUV625i Utility Vehicles be equipped with a high output alternator.

High-performance open-loop hydraulics system

Faster, smoother blade control.

Lift design

Power up/down with down pressure and float mode; power left to right angle to 25 degrees;two angling cylinders for maximum blade control and durability; easy off/on blade and mounting frame (no tools after initial set up).

Front mount for maximum lift height

266-mm (10.5–in.) vehicle clearance.

Industrial remote control

Backlit for easy viewing in dark conditions.

Reversible cutting edge

For extended-wear life.

182.9-mm (72–in.) reinforced moldboard

Minimizes blade twist and torque for maximum durability.

Heavy-duty springs

Protects the vehicle and blade from damage.

NOTE: Not compatible with winch.

POWERtach deflector shield

Deflector shield:

• 203.2-mm (8-in.) length, with full-length steel reinforcement for durability
• Horizontal configuration minimizes the impact to roll snow off the blade

ORDERING INFORMATION

Contact your local John Deere dealer for availability and pricing information.

POWERtach deflector shield
Order number: LPPK140

POWERtach is a trademark of POWERtach company.

POWERtach blade marker

Blade markers

• 20 in. in length with 3/8-in. diameter
• Threaded steel bases and high-strength cable inside the tubing for durability
• Yellow with 1-in. reflective safety tape at the top ends
• Supplied with hardware and vinyl end caps

ORDERING INFORMATION

Contact your local John Deere dealer for availability and pricing information.

POWERtach blade markers
Order number: LPPK120

POWERtach is a U.S.-registered trademark of POWERtach company.

POWERtach Poly Wear Bar

Polyurethane cutting edges offer several performance advantages over steel or rubber cutting edges:

• Better abrasion characteristics than rubber and most metals
• Absorbs impacts and conforms to the surface being plowed
• Ideal choice for use on concrete, parking garages, brick pavers, cobblestones, or any other uneven surface
• Reduces driver fatigue and equipment wear by minimizing blade and equipment vibration
• Quiet in operation, making them ideal for residential areas and hospitals

ORDERING INFORMATION

Contact your local John Deere dealer for availability and pricing information.

POWERtach Poly Wear Bar
Order number: LPPWBK72

POWERtach is a U.S.-registered trademark of POWERtach company.

POWERtach rubber squeegee

Rubber squeegee

• Absorbs impacts and conforms to the surface being plowed
• Is a great choice for use on sidewalks and other sensitive surfaces such as brick and cobblestone
• Provides quiet operation ideal for residential and commercial applications

ORDERING INFORMATION

Contact your local John Deere dealer for availability and pricing information.

POWERtach rubber squeegee
Order number: LPPK150

POWERtach is a U.S.-registered trademark of POWERtach company.

POWERtach heavy-duty skid shoes

Benefits of cast-iron skid shoes include:

• Deliver three times the wear resistance of conventional steel shoes
• Ultra-rugged construction consisting
  • 3.18-kg (7-lb) in weight (per individual skid shoe)
  • 146.1-mm (5-3/4-in.) shoe diameter
  • 25.4-mm (1-in.) shoe thickness

ORDERING INFORMATION

Contact your local John Deere dealer for availability and pricing information.

POWERtach heavy-duty skid shoes
Order number: LPPK160

POWERtach is a trademark of POWERtach company.

Rear bumper kit (TH 6X4 shown)

The rear bumper offers stylish, heavy-duty rear protection to the vehicle.

Compatible with:

• Model year 2011 and later Gator™ XUV 625i, XUV 825i, and XUV 855D Utility Vehicles
• Model year 2010 and later Gator TX, TX Turf, TH 6X4 Gas, TH 6X4 Diesel, and TE Utility Vehicles

Shown on XUV825i

The operator protection system (OPS) poly rear window is an excellent solution for operators seeking to reduce dust and air flow throughout the operator station when coupled with a half or full windshield (vent open for best results). Made out of high-impact-strength abrasion-resistant polycarbonate material, this rear window is highly durable and scratch resistant. It also attaches to and detaches from the OPS with ease, thanks to the quick-clamp mounting system.

Compatible with Gator™ XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, and HPX Utility Vehicles.

Deluxe cab frame kit (shown on XUV 620i)

The deluxe cab is ideal for commercial users and others who want superior weather protection and a clean working environment. It is designed to conform/integrate with the Gator™ HPX and XUV Utility Vehicles.

Compatible with HPX, XUV 620i, 625i, 825i, 850D, and 855D Utility Vehicles.

Features for the deluxe cab frame include:

• Best-in-class visibility
• Rollover protective structure (ROPS) certified to SAE J2194
• Exceptional head, shoulder, and arm room to provide unmatched operator comfort

Field-installed components (sold separately) to complete deluxe cab:

Deluxe cab components (XUV 855D shown)

Deluxe cab open doors view (XUV 855D shown)

NOTE: The deluxe cab for HPX and XUV Utility Vehicles is now available as factory installed or field installed. The factory-installed cab includes the deluxe cab frame, including roof, windshield, wiper, electrical kit, and rear window and glass door.

The remote cargo box release kit is required if the vehicle is not equipped with a cargo box power lift. The remote cargo box release kit comes standard (factory installed) when an HPX or XUV Utility Vehicle is ordered without the property care package and with the deluxe cab structure.

Deluxe poly door close-off panels

Required with deluxe poly door kit

Kit includes:

• Left- and right-hand fender closeouts
• Left- and right-hand close offs around fuel tank and air cleaner

Glass door kit shown on deluxe cab frame with front windshield and rear window (shown with optional beacon light and light kits)

Glass door kit includes:

• Large, premium glass doors for greater visibility
• Key lock guard against theft (two keys provided)
• Commercial-grade gas shocks provide effortless one-hand opening and closing

Compatible with the following vehicles:

• Model year 2004 – current Gator™ HPX Diesel Utility Vehicles when equipped with a deluxe cab frame
• Gator XUV 620i and XUV 850D Utility Vehicles when equipped with a deluxe cab frame
• Model year 2011 – current Gator XUV 855D Utility Vehicles when equipped with a deluxe cab frame (not compatible with XUV 825i S4 or XUV 855D S4 Utility Vehicles)

NOTE: Air-cleaner relocation kit and noise-reduction kit is recommended to reduce the noise and vibration levels within the deluxe cab when the glass door kit is installed.

OPS rear panel (shown with poly roof)

The rear panel for the OPS poly cab is ideal for outdoor enthusiasts and others desiring four-season weather protection.

The Poly Cab is sold as individual components; OPS poly or glass windshield, OPS poly roof, OPS rear panel, and doors kit. This gives operators the flexibility to configure the vehicle to meet their unique needs.

Key features of the rear panel:

• Rear panel is thermoformed from thick ABS plastic for impact resistance, durability, and style
• Three-piece sliding glass window, which provides excellent visibility and ventilation
• Installs in minutes with quick clamps to the OPS structure
• Installed with full windshield (vent open) to help eliminate dust from entering operator station

Compatible with:

• MY13-current HPX (if equipped with cargo box power lift)
• MY13-current 625i
• MY13-current 825i and 825i S4
• MY13-current 855D and 855D S4

Poly cab doors (shown with rear panel, poly roof, and glass windshield)

Poly cab doors (shown with glass windshield, poly roof, and rear panel)

Inside of poly cab door

Standard side mirrors

The poly cab doors for the operator protection system (OPS) poly cab is ideal for outdoor enthusiasts. Doors are not sealed for water tight performance.

The poly cab is sold as individual components; OPS poly or glass windshield, OPS poly roof, OPS rear panel, and the doors kit. This gives operators the flexibility to configure the vehicle to meet their unique needs.

Key features of the poly cab doors:

• Doors are thermoformed from thick ABS plastic for impact resistance, durability, and style
• Reinforced with steel tubing for rigidity
• Mounted on heavy-duty hinges for durability
• Automotive style latches
• Locking door handle
• Large glass sliding windows provide excellent side-to-side visibility
• Standard side rear-view mirrors

Optional accessories designed to integrate with the OPS poly cab system:

• Heater (same as the deluxe glass cab)
• OPS and roof mounted lights
• OPS seat belt comfort strap
• OPS overhead organizer
• Gator™ OPS and deluxe cab cover
• Floor mats

Compatible with:

• Model year 2013 – current Gator XUV 625i Utility Vehicles
• Model year 2013 – current Gator XUV 825i and XUV 855D Utility Vehicles (not compatible with S4 models)

Rear window (1) shown on XUV 855D

The rear window kit includes:

• Premium-grade rear glass and mounting hardware

It is compatible with the following vehicles:

• All Gator™  model year 2011 and beyond HPX Gas, HPX Diesel, XUV 625i, XUV 825i, and XUV 855D Utility Vehicles when equipped with a deluxe cab frame

Cargo box pail holder

Cargo box pail holder

The 5-gal. (18.9-L) pail holder is ideal for operators who want to maximize the work capability of their Gator™ Utility Vehicle. The 5-gal. (18.9-L) pail holder keeps pails in place within the cargo box, ensuring that they stay safe and secure. Featuring the quick-clamp mounting system, it mounts easily to the cargo rails of the cargo box with just one clamp.

Deluxe cargo box bed mat

The deluxe cargo box bed mat not only protects the steel floor from scratches and dents, it also provides additional cushioning and slip resistance to items being hauled in the cargo box.

Cargo box divider located at rear of cargo bed

Cargo box divider located at front of cargo bed

Speedrail lock in the unlocked postion

Speedrail lock in the locked postion

The Gator™ XUV Series can be equipped with an optional divider for the deluxe cargo box. The dividers can be positioned at the front or rear of the cargo box bed. To change positions of the dividers, simply release the speedrail locks by hand and slide into new position, then close the locks to secure the dividers.

Cargo box side extension kit

The cargo box side extension kit expands the versatility of the Gator™ and is ideal for those who are enhancing their property and landscape. The extensions allow users to haul twice the volume (not to exceed cargo box weight capacity) of light material such as grass clippings and mulch.

Product features include:

• Four-sided structure that increases cargo box side height to 21 in. (533 mm) and volume to 26 ft³ (0.74 m³)
• Sides and front mounted with hardware while the tailgate can be attached or removed without tools
  • Tailgate pivots at the top (similar to a dump truck) for ease of dumping loose material
• Laser cut, heavy-gauge powdered-coated steel provides excellent durability
• Compatible with all model year 2011 – current Gator XUV 625i, XUV 825i, XUV 825i S4, XUV 855D, XUV 855D S4 and M-Gator A2 Utility Vehicles
• Compatible with model year 2010 to current Gator TX 4X2, TH 6X4 Gas, TH 6X4 Diesel, TE, and TX Turf Utility Vehicles
• Compatible with Gator cabs and bed liner

NOTE: The cargo box side extensions are not intended to increase the rated cargo box carrying capacity per the vehicle specification.

Tool rack

Tool rack with tools

The side tool rack enables the user to maximize the use of their cargo box by carrying long-handled tools, such as trimmers, shovels, and rakes, on the outside of the box. The holders are adjustable, allowing the users to carry a wide array of items in the racks.

Tool rack holder detail

Adjusting the tool rack holder

Spare tire carrier

Spare tire carrier

Easily mount a spare tire to the side of the cargo box with this convenient kit.

Recommended to carry spare front tire, as the front tire can be mounted on either the front or rear hubs.

Installed on a vehicle – full-up position

The Gator™ XUV Series can be equipped with an optional power lift for the cargo box. This is one of the most important accessories for increasing work efficiency. It is an excellent complement to this highly capable utility vehicle.

The power lift offers the following features:

• Capable of lifting a maximum vehicle cargo box load of 454 kg (1000 lb)
• Lifts box to 49 degrees from horizontal for ease of service and cargo box load removal
• Quick horizontal to 49 degree time
• Can be installed in minutes using the vehicle’s pre-wired connectors and mounting points
• Compact design fits nicely around transmission and linkages, providing full protection
• Fully sealed and weather-proof hydraulic design does not require maintenance and is built for maximum durability
• Driven by proven electric motor and gear pump
• Electric motor protected by a circuit breaker
• Integrated check valve assures load holding
• Overload relief valve protects against misuse
• No setup required for hydraulics
• Compatible with model year 2017 and older HPX gas and diesel
• Compatible with all model year 2011 – current Gator XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles
• Also compatible with model year 2013 – current Gator XUV 825i S4 and XUV 855D S4 Utility Vehicles

21 Steel Utility Cart

The 21 Steel Utility Cart is the ideal companion for the Gator™ Utility Vehicle:

• 454-kg (1000-lb) load limit
• Dump angle of 35/40 degrees
• Spring-loaded dump latch for easy dumping and positive lock to prevent accidental unlocking when being towed
• Large pneumatic tires
  • Provide good flotation in mud, sand, and other wet or soft areas
  • Flex over bumps and ruts for a smoother, more controlled ride
  • Minimize ground compaction to save turf and prevent ruts in soft ground
• Unique bracket less tailgate means no side channels to obstruct materials when emptying
• When shoveling, recessed flat bolt heads stay out of the way
• Heavy-duty, reinforced one-piece solid undercarriage
• Contoured corner bed design
• Suitable for use with most John Deere utility vehicles equipped with a 48-mm (1-7/8-in.) ball hitch, including Gater™ Utility Vehicle models TX, TX Turf, TH 6×4, TH 6×4 Diesel, all HPX 4×4 models, and all XUV models

ORDERING INFORMATION

Contact the local John Deere dealer for availability and pricing information.

21 Steel Utility Cart
Order number: LPUT21JD

Engine coolant heater

Adapter parts

Attached to the engine cylinder block, the engine coolant heater plugs into a 120-V electrical outlet to warm the engine for fast cold-weather starts. It is rated for 400 W output power.

Engine coolant heater

Adapter parts

Attached to the engine cylinder block, the engine coolant heater plugs into a 120-V electrical outlet to warm the engine for fast cold-weather starts. It is rated for 400 W output power.

Yellow bench seat cover

Gator™ HD XUV bench seat cover

• Designed for heavy-duty two-passenger and four-passenger Gator XUV Utility Vehicles
• Compatible with Gator XUV625, XUV825, XUV855, XUV825 four-passenger, and XUV855 four-passenger Utility Vehicles
• Includes cover for seat and back benches
• Must order two kits for four-passenger (two-row) vehicles
• Protection for bench seats from mud and stains
• Cushioned seat for extra comfort
• Convenient pockets to store tools and gear
• Elastic hem-cord closure for easy adjustment resulting in a custom-like fit
• Easy access to seatbelts
• Options for storing gear behind the seats with zippered and open-top pouches

Ordering information
Contact the local John Deere dealer for availability and pricing information.

Camo bucket seat cover

Available through Order Zone. Visit Order Zone for product details and ordering information.

Cushioned covers protect new seats and renew old seats

• Heavy-duty seat protection against sun damage, rain and dirt
• Cushioned for extra comfort
• Elastic cord hem for a custom fit
• Two convenient zippered pockets keep tools and gear within reach
• Two mesh stuff pockets

Floor mat (shown on XUV 825i)

The washable rubber mat protects the vehicle floor.

Compatible with Gator HPX, XUV 625i, XUV 825i, XUV 825i S4, XUV 855D, XUV 855D S4, M-Gator™ A2 Military, and M-Gator A3 Military Utility Vehicles.

Front bench seat cover

Available through OrderZone

Each kit contains: one bench base cover, one backrest cover, and installation instructions

Special features:

• Exceptional abrasion, tear, and puncture resistant
• Constructed with military-grade Cordura™ fabrics
• Protects original equipment manufacturer (OEM) seats from mud, snow, and debris
• Quick and easy installation
• Also available in REALTREE HARDWOODS HD™ pattern
• Front seat has modular lightweight load-carrying equipment MOLLE webbing between driver and passenger for MOLLE pouches
• Limited 1-year warranty
• Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

High-performance sport seat cover – black

Available through OrderZone

Each kit contains one bench base cover, one backrest cover, and installation instructions.

NOTE: One carton (two kits) outfit driver and passenger seats

Special features:

• Exceptional abrasion, tear, and puncture resistance
• Constructed with military-grade Cordura™ fabrics
• Protects original equipment manufacturer (OEM) seats from mud, snow, and debris
• Quick and easy installation
• Available in black or REALTREE HARDWOODS HD® pattern
• Military-grade zippers
• Limited 1-year warranty
• Made In U.S.A.

Compatible with Gator™ 825i and 855D Utility Vehicles with high-performance sport seats option.

REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited. Cordura is a trademark of Invista.

High-performance sport seat cover – camo

Available through OrderZone

Each kit contains one bench base cover, one backrest cover, and installation instructions.

NOTE: One carton (two kits) outfits driver and passenger seats

Special features:

• Exceptional abrasion, tear, and puncture resistance
• Constructed with military-grade Cordura™ fabrics
• Protects original equipment manufacturer (OEM) seats from mud, snow, and debris
• Quick and easy installation
• Available in black or REALTREE HARDWOODS HD® pattern
• Military-grade zippers
• Limited 1-year warranty
• Made In U.S.A.

Compatible with Gator™ 825i and 855D Utility Vehicles with high-performance sport seats option.

REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited. Cordura is a trademark of Invista.

Vehicle cover

• Provides year-round weather protection to a vehicle equipped with an operator protection system (OPS) or full enclosure (cab)
• Heavy-weight polyester fabric for maximum durability and resistance to tear
• Polyurethane-coated for maximum water resistance and repellency
• Dual reinforced air vents let air circulate and help to prevent ballooning in wind
• Reinforced rear corners for added durability
• Elastic shock cord in the bottom hem for a quick custom-like fit
• Compatible with the following models:
  • Traditional Series models (TS, TX, TX Turf, TH 6×4, TH 6×4 Diesel, and TE when equipped with a full enclosure), and HPX 4×4, HPX 4×4 Diesel, HPX 4×4 Trail, XUV 620i, and XUV 850D (with OPS or deluxe cab structure and accessories)
  • Gator™ model year 2011 XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles (with OPS or deluxe cab structure and accessories)

ORDERING INFORMATION

Please contact the local John Deere dealer for availability and pricing information.

Vehicle cover (full size—cab or structure)
Order number: LP93107

Camo vehicle cover

• REALTREE® HARDWOODS HD® pattern is so neutral it simply disappears into virtually any outdoor setting
• Provides year-round weather protection to a vehicle that is equipped with an operator protection system (OPS) or full enclosure (cab)
• Heavy-weight polyester fabric for maximum durability and resistance to tear
• Polyurethane (PU) coated for maximum water resistance and repellency
• Dual reinforced air vents let air circulate and help prevent ballooning in the wind
• Reinforced rear corners for added durability
• Elastic shock cord in the bottom hem for a quick custom-like fit
• Compatible with the following models:
  • Traditional Series models (TS, TX, TX Turf, TH 6×4, TH 6×4 Diesel, and TE when equipped with a full enclosure), HPX 4×4, HPX 4×4 Diesel, HPX 4×4 Trail, XUV 620i, and XUV 850D (with OPS or deluxe cab structure and accessories)
  • Gator model year 2011 XUV 625i, XUV 825i, and XUV 855D Utility Vehicles (with OPS or deluxe cab structure and accessories)

REALTREE HARDWOODS HD is a U.S.-registered trademark of Jordan Outdoor Enterprises Limited.

ORDERING INFORMATION

Contact the local John Deere dealer for availability and pricing information.

Gator OPS and deluxe cab camo cover
Order number: LP93103

48-mm (1-7/8-in.) ball hitch shown

The 51-mm (2-in.) ball hitch attaches to the drawbar or rear hitch to allow towing.

The ball hitch is available through Service Parts.

48-mm (1-7/8-in.) hitch ball

The 48-mm (1-7/8-in.) ball hitch attaches to the drawbar or rear hitch to allow towing.

The ball hitch is available through Service Parts.

Drawbar kit for receiver hitch

Description:

• Kit includes a 51-mm (2-in.) drawbar, 10-mm (0.39-in.) pin, and hair cotter pin
• Steel construction has a 25-mm (1-in.) ball hole size
• Can be mounted in the standard rear receiver hitch or the optional front receiver hitch
• Compatible with all Gator model year 2011-current XUV560, XUV560 S4, XUV590, XUV590 S4, XUV 625i, XUV 825i, XUV 855D, RSX860, and M-Gator™ A2 Utility Vehicles
• Compatible with XUV 620i and XUV 850D Utility Vehicles

NOTE: Compatible with all Gator HPX Utility Vehicles if equipped with an optional 51-mm (2-in.) front receiver hitch. An optional 51-mm (2-in.) rear receiver is not available for the Gator HPX models. A 32-mm (1-1/4-in.) rear receiver hitch and drawbar are available for the Gator HPX models.

Hitch mounting brackets

These brackets are needed to attach the Gator™ electric spreader mount hitch and control box to your heavy-duty Gator XUV Utility Vehicle manufactured prior to model year 2011.

Features:

• Powder-coated steel construction

Compatibility:

• XUV 620i and 850D Utility Vehicles and XUV 625i, 825i, and 855D Utility Vehicles pre model year 2011.

Ordering information

Available through Order Zone™.  Contact the local John Deere dealer for availability and pricing information.

Front hood rack

Expand the work capabilities of a Gator™ Utility Vehicle with the addition of the front hood rack designed specifically for all model year 2011 Gator XUV 625i, XUV 825i, XUV 855D, and M-Gator A2 Utility Vehicles. This generously sized rack (48 in. long x 13.5 in. wide x 3.5 in. deep) will haul up to a 100-lb payload.

Also compatible with model year 2013 – current Gator XUV 825i S4 and 855D S4 Utility Vehicles.

The rack easily mounts to the required BM22841 front brush guard. Once mounted, the rack tilts forward with the brush guard to allow full access to under-hood storage and service points.

The front hood rack is compatible with the operator protection system (OPS), OPS poly windshields, and deluxe cab system. The front windshield will open to the vent position, but it will not open all the way unless the front hood rack is swung forward.

MOLLE device pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

• Velcro flap closure
• Padded to protect device and contents
• Constructed with military-grade Cordura™ fabrics
• Utilizes the MOLLE attachment system
• Pair of 6-in. (152.4-mm) MOLLE sticks included
• Available in black or REALTREE HARDWOODS HD™ pattern
• Inner liner made of high-density coated pack-cloth nylon fabric
• Built-in drain hole
• Limited 1-year warranty
• Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE device pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

• Velcro flap closure
• Padded to protect device and contents
• Constructed with military-grade Cordura™ fabrics
• Utilizes the MOLLE attachment system
• Pair of 6-in. (152.4-mm) MOLLE sticks included
• Available in black or REALTREE HARDWOODS HD™ pattern
• Inner liner made of high-density coated pack-cloth nylon fabric
• Built-in drain hole
• Limited 1-year warranty
• Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE fire extinguisher pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

• Military-grade rapid extraction clips
• Fits standard round 2.5-lb (1.1-kg) fire extinguishers
• Padded to protect contents
• Constructed with military-grade Cordura™ fabrics
• Utilizes the MOLLE attachment system
• Pair of 6–in. (152.4-mm) MOLLE sticks included
• Available in black or REALTREE HARDWOODS HD™ pattern
• Inner liner made of high-density coated pack-cloth nylon fabric
• Limited 1-year warranty
• Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE fire extinguisher pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

• Military-grade rapid extraction clips
• Fits standard round 2.5-lb (1.1-kg) fire extinguishers
• Padded to protect contents
• Constructed with military-grade Cordura™ fabrics
• Utilizes the MOLLE attachment system
• Pair of 6–in. (152.7-mm) MOLLE sticks included
• Available in black or REALTREE HARDWOODS HD™ pattern
• Inner liner made of high-density coated pack-cloth nylon fabric
• Limited 1-year warranty
• Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE large storage pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

• Dual military-grade zippers and pulls
• Constructed with military-grade Cordura™ fabrics
• Utilizes the MOLLE attachment system
• Pair of 5–in. (127-mm) MOLLE sticks included
• Available in black or REALTREE HARDWOODS HD™ pattern
• Inner liner made of high-density coated pack-cloth nylon fabric
• Built-in drain hole
• Limited 1-year warranty
• Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE large storage pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

• Dual military-grade zippers and pulls
• Constructed with military-grade Cordura™ fabrics
• Utilizes the MOLLE attachment system
• Pair of 5–in. (127-mm) MOLLE sticks included
• Available in black or REALTREE HARDWOODS HD™ pattern
• Inner liner made of high-density coated pack-cloth nylon fabric
• Built-in drain hole
• Limited 1-year warranty
• Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE small storage pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

• Military-grade zippers and pulls
• Constructed with military-grade Cordura™ fabrics
• Utilizes the MOLLE attachment system
• Pair of 5–in. (127-mm) MOLLE sticks included
• Available in black or REALTREE HARDWOODS HD™ pattern
• Inner liner made of high-density coated pack-cloth nylon fabric
• Limited 1-year warranty
• Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE small storage pouch

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

• Military-grade zippers and pulls
• Constructed with military-grade Cordura™ fabrics
• Utilizes the MOLLE attachment system
• Pair of 5–in. (127-mm) MOLLE sticks included
• Available in black or REALTREE HARDWOODS HD™ pattern
• Inner liner made of high-density coated pack-cloth nylon fabric
• Limited 1-year warranty
• Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

Cargo box fender guard kit

The cargo box fender guards offer enhanced styling in addition to heavy-duty protection to the side of the cargo box:

• Compatible with all model year 2011 and later Gator™ XUV 625i, XUV 825i, and XUV 855D Utility Vehicles.
• Compatible with model year 2013 – current Gator XUV 825i S4 and XUV 855D S4 Utility Vehicles.
• Compatible with model year 2010 and later Gator TX, TX Turf, and TE Utility Vehicles.

NOTE: BM22767 rear bumper is required to install the cargo box fender guards.

Deflector plate detail

The large, heavy-duty skid plate adds additional protection for the frame and critical powertrain components:

• Thick, 3.8-mm (0.15-in.) material handles impacts
• Compatible with model year 2011 and later Gator™ XUV 855D Utility Vehicles
• Compatible with model year 2013 – current Gator XUV 855D S4 Utility Vehicles

Front CV guards

Constant-velocity (CV) guards add additional protection for the A-arms and CV half shafts:

• Formed steel guards handle impacts while maintaining a low unsprung mass
• Easily bolts to the A-arms
• Drainage holes provided to prevent buildup of dirt, grass, and other loose materials
• Compatible with all Gator™ XUV 625i, XUV 825i, XUV 825i S4, XUV 855D, XUV 855D S4, and M-Gator A3 Utility Vehicles

Brush guard shown on XUV 855D Olive and Black

Brush guard shown on XUV 625i Camo

NOTE: Images above show brush guard with Adventure light kit installed.

The heavy-duty brush guard provides a modern and aggressive appearance for all model year 2011 -current Gator™ XUV 625i, XUV 825i, XUV 855D, and M-Gator A2 Utility Vehicles:

• Massive welded brush guard is made of large-diameter, 44.45-mm (1.75-in.) tubing and thick steel plates to provide superb protection for the front grille, lights, and hood
• Possesses welded brackets for quick installation of the Adventure light kit
• Rotates forward without tools for easy access to service points and additional storage under the hood

Rear CV guards

CV guards add additional protection for the A-arms, brake lines, and CV half shafts:

• Formed steel guards handle impacts while maintaining a low unsprung mass
• Easily bolts to the A-arms with six bolts
• Drainage holes provided to prevent buildup of dirt, grass, and other loose materials
• Compatible with all model year 2011 – current Gator™ XUV 625i, XUV 825i, XUV 855D, and M-Gator A2 Utility Vehicles
• Compatible with model year 2013 – current Gator XUV 825i S4 and 855D S4 Utility Vehicles

Heater kit

Three directional louvers provide windshield defrosting and complete operator comfort.

Kit includes:

• High-output two-speed heater
• Mounting hardware
• Coolant hoses
• Electrical harness

Heater outputs around 9800 BTU

Compatible with the following vehicles:

• All model year 2011 – current Gator™ HPX Gas, HPX Diesel, XUV 625i, XUV 825i, XUV 855D, and M-Gator A2 Utility Vehicles
• Also compatible with model year 2013 – current Gator XUV 825i S4 and XUV 855D S4 Utility Vehicles

Heater fitting kit

It is compatible with the following vehicles:

• All model year 2011 – current Gator™ XUV 855D and M-Gator™ A2 Utility Vehicles
  • This heater fitting kit works with BM23608 heater kit and diesel engine
• All model year 2004 – current Gator HPX and XUV 850D Utility Vehicles
  • This heater fitting kit works with BM23608 heater kit and diesel engine
• All model year 2013 – current Gator XUV 855D S4 Utility Vehicles
  • This heater fitting kit works with BM23608 heater kit and diesel engine

Horn components

Kit includes:

• Horn
• Mounting brackets
• Wire harness and switch

The switch mounts on the dash of the vehicle, while the wiring harness connects to the main vehicle harness.

Beacon light

Features and benefits:

• 3-in. (76-mm) round, light-emitting diode (LED) strobe light provides excellent visibility for vehicle bystanders
• Especially useful for working around properties and job sites
• Acrylic amber lens resists scratching and scuffing
• Impact-resistant nylon housing
• SAE J845 (Class 3)-compliant
• UL recognized
• Stands 4.4 in. (111.5 mm) tall

Compatible with the following vehicles:

• Model year 2006 to current Gator™ HPX Utility Vehicles
  • Requires poly roof and operator protection system (OPS) switch bank for mounting
  • Requires beacon light harness kit
• Gator XUV 620i and 850D Utility Vehicles
  • Requires poly roof and OPS switch bank for mounting
  • Requires beacon light harness kit
• Model year 2011 to current Gator XUV 625i, 825i, 825i S4, 855D, and 855D S4 Utility Vehicles
  • Requires poly roof and OPS switch bank for mounting
  • Requires beacon light harness kit
• Gator XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590i, XUV590i S4 Utility Vehicles
  • Requires OPS switch bank and brake/tail light for brake light mounting or OPS switch bank and poly roof for roof mounting
  • Requires beacon light harness kit
• Gator RSX Utility Vehicles
  • Requires OPS switch bank and brake/taillight for brake light mounting or OPS switch bank and poly roof for roof mounting
  • Requires beacon light harness kit

Beacon light harness kit (shown on Gator™ XUV560)

The beacon light harness kit is required when installing the beacon light.

The kit includes the switch to mount in the operator protection system (OPS) switch bank and wire harness between the OPS switch bank and beacon light.

Beacon light kit

Rotary light provides excellent visibility to vehicle bystanders:

• Especially useful for working around properties and job sites
• Sturdy design allows the Gator to be hauled on a trailer forward or backward at highway speeds with the light installed
• Contains a breakaway mounting system
  • Sealed package (waterproof)
  • Amber lenses are rugged, shatter-resistant poly material
• Light assembly bolts to the rear of the cab frame
• Convenient overhead mounted on/off rocker switch for easy operation
• As with all Gator electrical kits, the light kit ties into the vehicle’s wiring harness for quick installation

Compatible with the following vehicles:

• All Gator model year 2011-current XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles when equipped with a deluxe cab frame and electrical kit
• All Gator HPX model year 2004-current, XUV 620i, and XUV 850D Utility Vehicles when equipped with a deluxe cab frame and electrical kit
• Traditional Series—TS, TX, TX Turf, and TH 6×4—when equipped with a soft-door or hard-door cab and electrical kit
• M-Gator A1 when equipped with a hard-door cab and electrical kit

Brake and taillight kit

The integrated brake and taillight kit offers an updated, stylish design in addition to being highly visible in all light conditions.

Compatible with:

• Model year 2011 – 2017 Gator™ XUV 625i, XUV 825i, and XUV 855D Utility Vehicles
• Model year 2013 – 2017 XUV 825i S4 and XUV 855D S4 Utility Vehicles
• Model year 2010 – 2017 Gator TX, TX Turf, and TH 6X4 Utility Vehicles equipped with the deluxe cargo box

Brush guard light harness kit

The brush guard light harness kit is required when installing the light kits to the brush guard or PreRunner bumper on the Gator™ RSX.

The kit includes the switches and wire harnesses.

Front work light kit

Two 55-W halogen lights provide superb visibility for nighttime operation:

• Especially useful for working around properties and job sites
• Sturdy design allows the Gator to be hauled on a trailer forward or backward at highway speeds with the lights installed
• Light assemblies bolt to the front of the cab frame, creating a consistent lighting pattern
• Convenient overhead-mounted on/off rocker switch for easy operation
• As with all Gator electrical kits, the light kit ties into the vehicle’s wiring harness for quick installation

Compatible with the following vehicles:

• All Gator model year 2011-current XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles when equipped with a deluxe cab frame and electrical kit
• All Gator HPX model year 2004-current, XUV 620i, and XUV 850D Utility Vehicles when equipped with a deluxe cab frame and electrical kit
• Traditional Series—TS, TX, TX Turf, and TH 6×4—when equipped with a soft-door or hard-door cab and electrical kit
• M-Gator A1 when equipped with a hard-door cab and electrical kit

Front OPS / roof light harness kit

The front OPS/roof light harness kit is required when installing the light kits to the front of the OPS or roof. Also requires OPS switch bank.

The kit includes the switch and wire harnesses from the OPS switch bank to the lights.

Interior light kit

• Interior overhead light provides visibility for nighttime operation
• Light assembly bolts into the overhead panel of the cab for automotive styling
• Contains an on/off rocker switch for easy operation
• As with all Gator electrical kits, the light kit ties into the vehicle’s wiring harness for quick installation

Compatible with the following vehicles:

• All Gator model year 2011-current XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles
• All Gator HPX model year 2004 to current, XUV 620i, and XUV 850D Utility Vehicles when equipped with a deluxe cab frame and electrical kit
• Traditional Series—TS, TX, TX Turf, and TH 6×4 when equipped with a soft-door or hard-door cab and electrical kit
• M-Gator A1—when equipped with a hard-door cab and electrical kit

Roof mounted

Brush guard mounted

RIGID INDUSTRIES LED DRIVING LIGHTS (TWO LIGHTS PER KIT)

Lux = measure of intensity of light that hits or passes through a surface

Mounted on the front operator protection system (OPS)/roof or brush guard for extreme night driving lights.

LED LIGHT SPECIFICATIONS:

• 50,000+ hour lifespan
• IP69K certified
• Polycarbonate lens
• Aluminum housing
• Powder-coat finish
• Sealed Deutsch connectors
• Operating Temp -40°F – 145°F
• MIL810-STDG vibration certified
• ASTMB117 salt / fog certified
• Standard black lens covers

The LED lights are compatible with the HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, XUV560, XUV560 S4, XUV590i, XUV590i S4, RSX Utility Vehicles.

These lights are not compatible with Jensen radios or deluxe cab frame.

The LED lights can be mounted on the brush guard, roof (front or rear), or directly on the OPS (front or rear). Roof or OPS mount requires the OPS Switch Bank.  The LED light kits also require the necessary Light Harness Kit based on the desired light mounting location:

Front OPS/roof light harness kit

Rear OPS/roof light harness kit

Brush guard light harness kit

Roof mounted

RIGID INDUSTRIES LED WORK LIGHTS (TWO LIGHTS PER KIT)

Lux = measure of intensity of light that hits or passes through a surface

Ideally mounted on the front or rear operator protection system (OPS)/roof for light around the vehicle to work at all hours of the night.

LED LIGHT SPECIFICATIONS:

• 50,000 or more hour lifespan
• IP69K certified
• Polycarbonate lens
• Aluminum housing
• Powder-coat finish
• Sealed Deutsch connectors
• Operating temperature – 40°F – 145°F (4°C-63°C)
• MIL810-STDG vibration certified
• ASTMB117 salt / fog certified
• Standard black lens covers

The LED lights are compatible with the Gator™ HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, XUV560, XUV560 S4, XUV590i, XUV590i S4, RSX Utility Vehicles.

These lights are not compatible with Jensen radios or deluxe cab frame.

The LED lights can be mounted on the brush guard, roof (front or rear), or directly on the OPS (front or rear). Roof or OPS mount requires the OPS switch bank.  The LED light kits also require the necessary light harness kit based on the desired light mounting location:

Front OPS/roof light harness kit

Rear OPS/roof light harness kit

Brush guard light harness kit

OPS with power wire and switch bank

Switch bank (detail)

Product attributes:

• Accommodates up to three sets of OPS lights
• Allows for simple wire routing – only two wires run through the OPS or roll-over protective structure (ROPS) tubes; each light kit has its own switch and wiring harness
• Switches are located in the OPS or rollover protective structure (ROPS)

Compatible with:

• Model year 2011 – current Gator™ XUV, HPX Gas, HPX Diesel, and M-Gator A2 Non-Military Utility Vehicles
• Model year 2012-2013 Gator XUV 550, XUV 550 S4, and RSX Utility Vehicles
• Model year 2013 – current Gator XUV 825i S4 and XUV 855D S4 Utility Vehicles
• Current Gator XUV560, XUV560 S4, XUV590, and XUV590 S4 Utility Vehicles

Rear work light kit

One 55-W halogen light provides superb visibility for nighttime operation:

• Especially useful for working around properties and job sites
• Sturdy design allows the Gator to be hauled on a trailer forward or backward at highway speeds with the lights installed
• Light assembly bolts to the rear of the cab frame, creating a consistent lighting pattern
• Convenient overhead-mounted on/off rocker switch enables easy operation
• As with all Gator electrical kits, the light kit ties into the vehicle’s wiring harness for quick installation

Compatible with the following vehicles:

• All Gator model year 2011-current XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles when equipped with a deluxe cab frame and electrical kit
• All Gator HPX model year 2004 to current, XUV 620i, and XUV 850D Utility Vehicles when equipped with a deluxe cab frame and electrical kit
• Traditional Series—TS, TX, TX Turf, and TH 6×4—when equipped with a soft-door or hard-door cab and electrical kit
• M-Gator A1 when equipped with a hard-door cab and electrical kit

Rear OPS / roof light harness kit

The rear OPS/roof light harness kit is required when installing the light kits to the rear of the OPS or roof. Also requires OPS switch bank.

The kit includes the switch and wire harnesses from the OPS switch bank to the lights.

Brake and taillight protector

The brake and taillight protector offers increased protection to the taillight assembly from incidental contact.

Work lights (rear mounted)

Increase the capability of the Gator™ Utility Vehicle by adding work lights. Lights mount to the front or rear of the poly roof or directly to the operator protection system (OPS).

Kit includes the pair of work lights and hardware. Requires necessary light harness kit based on desired mounting location.

Lights can also be installed in a low mount position behind the front bumper.

Product attributes:

• This flood light kit provides a wide range of light, making it ideal for tasks at night
• Especially useful for working around properties and job sites
• Requires OPS switch bank when mounted to roof or OPS

Compatible with:

• XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590i, XUV590i S4
• HPX
• XUV 625i, XUV 825i, XUV 825i S4, XUV 855D, and XUV 855D S4
• RSX Utility Vehicles

Shown mid-size XUV

The OPS rearview mirror for Gator™ Utility Vehicles can be installed when equipped with an OPS.

The rearview mirror can be positioned in multiple locations on the OPS and offers expanded visibility for the operator.

Product attributes include:

• Composite components made of impact resistance materials
• Installs with quick clamp to OPS tube
• Compatibility with all Gator Utility Vehicles equipped with an OPS

Shown on Gator™ HD XUV

Shown on HD XUV

The OPS side mirrors for Gator Utility Vehicles can be installed when they are equipped with OPS.

The side mirrors can be positioned in multiple locations on the OPS and offers expanded visibility for the operator.

Product attributes include:

• Composite components made of impact-resistant materials
• Installs without tools and easily adjustable
• Compatibility with all Gator HPX, XUV 620i, XUV 850D, XUV 625i, XUV 825i, XUV 825i S4, XUV 855D, XUV 855D S4, XUV 550, XUV 550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, RSX, M-Gator A2, and M-Gator A3 Utility Vehicles equipped with an OPS

NOTE: OPS side mirrors are not compatible with the deluxe cab or poly cabs (poly cabs include standard mirrors).

Exterior mirror kit

The rigid design of the exterior mirror kit allows the Gator to be hauled on a trailer forward or backward at highway speeds with the mirrors installed.

• Adjustable mirror assembly bolts to the cab frame
• Contains a breakaway mounting system

The kit is compatible with the following vehicles:

• All Gator model year 2011 – current XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles equipped with a deluxe glass cab.
• All Gator XUV 620i and 850D Utility Vehicles equipped with a deluxe glass cab.

Cargo bed extender

Cargo bed extender

The cargo bed extender conveniently extends the rear of the cargo bed, and also acts as a cargo box divider when it is flipped inside of the cargo box. The cargo bed extender easily flips in or out with the use of quick-pull pins.

Deluxe poly door for deluxe cab

Interior deluxe poly door

The deluxe poly door includes deluxe cab frame, seatbelts, glass windshield, wiper, electrical kit, rear window, close off panels, and left and right deluxe poly doors with roll down windows out of the factory. When ordering option code 4010, also order option code 4049 (less roof and rear screen) and option code 6309 (less front hood rack).

Heavy-duty fender guard (shown on XUV 825i)

The heavy-duty fender guards provide a modern and aggressive appearance for all model year 2011 – current Gator™ XUV 625i, XUV 825i, XUV 855D, and M-Gator A2 Utility Vehicles.

Also compatible with model year 2013 – current Gator XUV 825i S4 and 855D S4 Utility Vehicles.

• Large, 1.75-in. (44.45-mm) diameter tubing provides superb protection for the front grille, lights, and fenders
• Compatible with standard front bumper

Abrasion-resistant full windshield

The abrasion-resistant full windshield features:

• Quick-clamp mounting system – tool-free installation and removal in seconds
• Manufactured from super-premium, two-sided Makrolon® AR grade abrasion-resistant polycarbonate
• Increased ultraviolet (UV) longevity – resists yellowing longer than optical-grade polycarbonate
• Increased chemical resistance over traditional optical-grade polycarbonate
• Almost as hard as glass with greater impact strength
• Bottom portion flips up and secured in place by two ball studs

Makrolon is a trademark of Bayer Aktiengesellschaft.

Comfort straps

Kit includes two comfort straps for the left and right seat belts.

• Provides relief to the operator’s and passenger’s upper body when driving over rough terrain by allowing the seat belt to stretch when the seat belt locks
• Moves the upper mounting point of the seat belt down 6 in. (152 mm)
• Can be mounted to both the driver- and passenger-side upper mounting point of the three-point seat belt
• Compatible with all model year 2017 – current Gator™ HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, XUV560, XUV560 S4, XUV590i, XUV590i S4, and RSX860i Utility Vehicles when equipped with standard Occupant Protective Structure (OPS)
• Compatible only with standard Occupant Protective Structure (OPS), for deluxe cab frame, order BM22703

Remote air-intake filter

The air cleaner relocation kit is designed to lower the engine intake noise by moving the remote engine air-intake filter inlet to the outside of the battery enclosure, reducing resonance and vibration through the battery box. The kit permits easy access to the air filter for service. It is not recommended to install this kit when the vehicle is used in extreme dusty conditions as the air filter intake is now located outside of the vehicle.

The kit includes the following parts:

• New assembled air cleaner
• New air cleaner retainer

NOTE:

• Not compatible with windshield washer kit for deluxe cab
• Requires noise reduction kit to be compatible with closeout panels provided with glass door kit for the deluxe cab

Compatible with:

• Model Year 2015 – current HPX (Gas & Diesel), XUV625i, XUV855Di (Not S4)

Cell phones, global positioning system (GPS), and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator station.

RAM X-Grip holder

For proper machine operation, it is critical that accessory devices and tools be located and mounted where they are accessible but do not interfere with visibility and controls. The new RAM® mount kit has been specially developed to meet this need in John Deere tractors and now utility vehicles.

Simply remove the large wing nut from the assembly, insert the stud into any open hole in the occupant protective structure (OPS), and tighten down the jam nut.

Key benefits:

• Patented RAM X-Grip™ holder fits most cell phones and similar devices including iPod®, iPad®, iPhone®, BlackBerry®, Samsung Galaxy® and others.
• Mounts to the holes in the OPS
• Ball joints allow for variable positioning
• Holds firm even in rugged terrain
• The holder is compatible with many other RAM® products with their B size or 25.4-mm (1-in.) ball accessories

RAM X-Grip

The RAM X-Grip has a clean and clever four-leg design that sports great holding power without hiding the phone behind foam pads and plastic.

Features:

• Rustproof
• High-strength composite and stainless-steel construction
• Spring-loaded holder expands and contracts for custom fit
  • Minimum width: 1.875 in. (47 mm)
  • Maximum width: 3.25 in. (82 mm)
  • Depth: 0.875 in. (22 mm)
• Rubber-coated tips will hold device firm and stable
• Easy access grip knobs for quick release of your device

Warranty:

90 days, limited.

RAM and RAM X-Grip are trademarks of National Products Inc. iPad, iPod, and iPhone are trademarks of Apple, Inc. BlackBerry is a trademark of Research In Motion Limited (RIM). Samsung Galaxy is a trademark of  Samsung Electronics Co.

Electrical kit

Required to power electrical cab accessories, the electrical kit includes the following components:

• Main cab harness
• 30-amp fuse holder
• 30-amp fuse

It is compatible with the following vehicles:

• All Gator™ model year 2004-current HPX, XUV 620i, and XUV 850D Utility Vehicles when equipped with a deluxe cab frame
• All Gator model year 2011-current XUV 625i, XUV 825i, and XUV 855D Utility Vehicles when equipped with a deluxe cab frame

Parts included in kit

Pads assembled in battery compartment

Assembled air-cleaner cover

Completed kit installation

The kit includes the following parts:

• Assembled air-cleaner cover (replaces the closeout-panel kit included in deluxe cab door kit, located on the right side)
• Two foam pads
• Vinyl cover

The air-cleaner cover isolates the engine air-intake filter reducing sound and vibration in the cab. The battery compartment is covered by two foam pads, which dampen the engine air-intake noise and vibrations. The vinyl cover completes the closeout between the air-cleaner cover and vehicle frame.

NOTE:

• Deluxe cab door kit is required
• Air-cleaner relocation kit is recommended for best noise- and vibration-reduction performance

Compatible with all Gator™ HPX, HPX Diesel, XUV 625i, XUV 825i, XUV 855D, and M-Gator A2 and A3 Utility Vehicles when equipped with door kit.

OSR door with green panel

OSR door with olive panel

OSR door with camo panel

The OSR door kits are replacement kits for the factory-installed OSR doors, or can be installed on vehicles that had the OSR nets installed from the factory. These OSR doors can only be installed on model year 2014 or later Gator™ HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles.

The OSR color panels are sold separately, and can be installed on the OSR doors or the deluxe poly door.

OSR door with green panel

OSR door with olive panel

OSR door with camo panel

The OSR door kits are replacement kits for the factory-installed OSR doors, or can be installed on vehicles that had the OSR nets installed from the factory. These OSR doors can only be installed on model year 2014 or later Gator™ HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles.

The OSR color panels are sold separately, and can be installed on the OSR doors or the deluxe poly door.

OSR door with green panel

OSR door with olive panel

OSR door with camo panel

The OSR door kits are replacement kits for the factory-installed OSR doors, or can be installed on vehicles that had the OSR nets installed from the factory. These OSR doors can only be installed on model year 2014 or later Gator™ HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles.

The OSR color panels are sold separately, and can be installed on the OSR doors or the deluxe poly door.

OSR door with green panel

OSR door with olive panel

OSR door with camo panel

The OSR door kits are replacement kits for the factory-installed OSR doors, or can be installed on vehicles that had the OSR nets installed from the factory. These OSR doors can only be installed on model year 2014 or later Gator™ HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles.

The OSR color panels are sold separately, and can be installed on the OSR doors or the deluxe poly door.

OSR nets (shown on Gator™ HPX Utility Vehicle)

The OSR net kits are replacement kits for the factory-installed OSR nets, or can be installed on vehicles that had the OSR doors installed from the factory.

Compatible with model year 2014 or later Gator HPX, XUV625i, XUV825i, and XUV855D Utility Vehicles.

OSR nets (deluxe cab)

The OSR net kit for the deluxe cab are replacement nets for the factory installed OSR nets, or can be installed on vehicles that had the glass doors or deluxe poly door installed from the factory. These OSR nets can only be installed on model year 2014 and later Gator™ HPX, XUV625i, XUV825i, and XUV855D Utility Vehicles with the deluxe cab frame.

Comfort straps

A seat belt comfort strap is available for Gator™ Utility Vehicles equipped with an Occupant Protective Structure (OPS) or roll-over protective structure (ROPS).

PRODUCT ATTRIBUTES

• Kit includes two comfort straps for the left and right seat belts
• Provides relief to the operator’s and passenger’s upper body when driving over rough terrain by allowing the seat belt to stretch when the seat belt locks
• Moves the upper mounting point of the seat belt down 6 in. (152 mm).
• Can be mounted to both the driver- and passenger-side upper mounting point of the three-point seat belt
• Compatible with XUV620i and XUV850D Utility Vehicles
• Compatible with Model Year 2015 and older Gator HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4 and Military A3 Utility Vehicles
• Compatible with Model Year 2016 to current Gator HPX, XUV625i, XUV825i and XUV855D Utility Vehicles equipped with a Deluxe Cab
• Compatible with Model Year 2015 and older Gator XUV550, XUV550 S4, and RSX Utility Vehicles

Visor kit

The conveniently placed overhead visor provides sun protection.

It is compatible with the following vehicles:

• All Gator model year 2011-current XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles when equipped with a deluxe cab frame
• All Gator HPX model year 2004-current, XUV 620i, and XUV 850D Utility Vehicles when equipped with a deluxe cab frame
• Traditional Series—TS, TX, TX Turf, and TH 6×4—when equipped with a soft-door or hard-door cab
• M-Gato A1 when equipped with a hard-door cab

OPS stereo mounting kit shown with head unit

OPS stereo mounting kit – head unit/iPod player

Features include:

• Convenient netted storage area to store items such as, sunglasses, CDs, maps, and other personal items
• Two pre-mounted speakers
• Two interior lights; each light can be independently operated
• A 3-switch bank to operate various roof and OPS mounted accessories

Compatible with:

• Model year 2013 – current Gator™ HPX Utility Vehicles also equipped with a poly roof
• Model year 2013 – current Gator XUV 625i, 825i, and 855D Utility Vehicles also equipped with a poly roof

NOTE: Not compatible with deluxe cab frames.

The OPS stereo mounting kit includes the mounting kit only; the customer must choose one of the following three-head units to have a complete stereo:

• SWJHD1120 stereo, heavy-duty AM/FM/weatherband/auxiliary
• SWJHD1620 stereo, heavy-duty AM/FM/weatherband/SIRIUS® Satellite/iPod® ready
• SWJHD3620 stereo, heavy-duty AM/FM/weatherband/CD/SIRIUS Satellite/USB 2.0
• SWJDABIPDL iPod adaptor cable for SWJHD1620 and SWJHD3620

SIRIUS is a U.S.-registered trademark of SIRIUS XM Radio Inc. iPod is a U.S.-registered trademark of Apple Incorporated.

SWJHD1120 stereo head unit

SWJHD1620 stereo head unit

SWJHD3620 stereo head unit

Deluxe cab stereo mounting kit with head unit (sold separately). Shown with optional windshield washer kit, interior light kit, and visor kit.

Features include:

• Location for head unit (sold separately)
• Two pre-mounted speakers
• Antenna
• Switch the bank to mount switches for deluxe cab accessories

Compatible with:

• HPX, XUV 625i, 825i, 855D when equipped with deluxe cab frame

The deluxe cab stereo mounting kit includes the mounting kit only; the customer must choose one of the following three head units through Parts to have a complete stereo:

• SWJHD1130 stereo, heavy-duty AM/FM/weatherband/auxiliary
• SWJHD1630 stereo, heavy-duty AM/FM/weatherband/SIRIUS® Satellite/iPod®-ready
• SWJHD3630BT stereo, heavy-duty AM/FM/weatherband/CD/auxiliary/SIRIUS Satellite/ iPod-ready/Bluetooth®

SWJHD1130 stereo head unit

SWJHD1630 stereo head unit

SWJHD3630BT stereo head unit

SIRIUS is a trademark of SIRIUS XM Radio Inc. iPod is a trademark of Apple Incorporated. Bluetooth is a trademark of Bluetooth SIG Incorporated.

Provides shade and weather protection for the operator and passenger

Features:

• Helps prevent sun and weather damage to the seating area and controls
• Quickly attaches and detaches to the OPS with four straps — no tools required
• Heavy-duty fabric coated for maximum water resistance and repellency
• Two-year warranty

Ordering information:
Available through Order Zone. Contact the local John Deere dealer for availability and pricing information.

Poly roof shown with optional rear screen, roof mounted mid range lights

Poly roof shown with optional rear screen, rear mounted mid range lights

Product attributes

• Provides all-year-round weather protection to the operator and passenger when a Gator™ XUV or HPX is equipped with an operator protection system (OPS)
• One-piece ABS roof easily attaches/detaches to the OPS quick-clamp mounting system
• Useful for minimizing sun exposure to the operator, passenger, and vehicle operating station
• Molded-in water troughs route water away from the operator and passenger
• Acts as the foundation to build an OPS poly full enclosure (designed to work with the OPS poly full windshield kit and OPS poly rear panel and doors kit)
• Compatible with all model year 2013 – current HPX, XUV 625i, XUV 825i, and XUV 855D Utility Vehicles when equipped with an OPS

Shown on XUV 825i

OPS poly roof – camo (rear view)

• Provides all-year-round weather protection to the operator and passenger
• One-piece thermoformed ABS roof easily attaches/detaches to the operator protection system (OPS) with four quick clamps
• Exterior surface is covered in REALTREE® HARDWOODS HD® camouflage pattern
• Molded-in water troughs route water away from the operator and passenger
• Acts as the foundation to build an OPS poly cab enclosure (designed to work with the OPS full poly and glass windshield kit and the OPS poly rear panel and doors kit)
• Compatible with all model year 2013 – current Gator™ HPX Utility Vehicles, model year 2013 – current XUV 625i, XUV 825i, and XUV 855D Utility Vehicles when equipped with an OPS

REALTREE HARDWOODS HD is a U.S.-registered trademark of Jordan Outdoor Enterprises Limited.

Cushioned covers protect new seats and renew old seats

Features:

• Heavy-duty seat protection against sun damage, rain, and dirt
• Cushioned for extra comfort
• Elastic cord hem for a custom fit
• Two convenient zippered pockets keep tools and gear within reach
• Two mesh stuff pockets
• Two-year warranty

Ordering information
Available through Order Zone. Contact the local John Deere dealer for availability and pricing information.

Front bench seat cover

Available through OrderZone

Each kit contains: one bench base cover, one backrest cover, and installation instructions

Special features:

• Exceptional abrasion, tear and puncture resistance
• Constructed with military-grade Cordura™ fabrics
• Protects original equiment manufacturer (OEM) seats from mud, snow, and debris
• Quick and easy installation
• Also available in black
• Front seat has modular lightweight load-carrying equipment (MOLLE) webbing between driver and passenger for MOLLE pouches
• Limited 1-year warranty
• Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics.

Shown with deluxe cab

The seat belt kit is required with field-installed deluxe cab frames. The kit comes with both the right- and left-hand three-point seat belts, including the retractors and buckles.

Compatible with deluxe cab frame only.

Speed limiting clutch kit

 NOTE: Image above shows clutch with spacer (1) installed over the center shaft.

The speed limiting clutch kit is a semi-permanent solution that allows customers to adjust the top speed of their XUV 825i, 825i S4, 855D or 855D S4 Utility Vehicle.  A spacer inserted into the clutch prevents the clutch from fully collapsing, thereby limiting top speed.

When the kit is installed, it limits top speeds to the following:

• 25 mph for XUV 855D and XUV 855D S4
• 30 mph for XUV 825i and XUV 825i S4

Compatible with model year 2013 to current XUV 825i, 825i S4, 855D, or 855D S4 Utility Vehicles

45-gal. (170-L) Gator bed sprayer

The 45-gal. (170-L) Gator bed sprayer is designed to work with the Gator vehicles equipped with the steel bed or deluxe cargo box. It provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. It comes complete with a 43-in. boom that sprays a 120-in. swath. It’s equipped with a 20-ft hose and a spray wand for spot spraying lawns, shrubs, trees, etc. The fully adjustable brass spray wand tip achieves streams up to 30 ft. It comes equipped with rubber feet and custom brackets, which secure to the Gator bed, for a no tools mount.

Special features:

• 45-gal. (170-L) capacity
• Brackets secure to Gator bed, no tools or additional strapping required after initial set-up
• Brackets allow boom height adjustment
• 100 psi SHURflo diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage
• The fully adjustable brass spray wand tip achieves streams up to 30 ft
• Equipped with a 20-ft hand wand hose with side mount hose tender for convenience
• Check valves in boom tips prevent siphoning and dripping, which can cause lawn spotting
• On/off switch located near operator
• Easy boom removal for added convenience
• Control valve channels spray to either the boom or spray wand
• 12-V plug included with wiring harness, complete with quick-disconnects, for convenient electrical hookup
• Rugged translucent yellow tank with molded fill level indicators (in gallons)

SPECIFICATIONS

ORDERING INFORMATION

Contact the local John Deere dealer for availability and pricing information.

45-gal. (170-L) Gator bed sprayer
Order number: LP20852

SHURflo is a U.S.-registered trademark of Sta-Rite Industries, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.

High-performance 45-gal. (170-L) Gator bed sprayer

The high-performance Gator bed sprayer is designed to work with Gator vehicles equipped with the deluxe cargo box or steel bed. With a 45-gal. (170-L) capacity, high volume electric pump, and premium pistol grip spray gun, it provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray and de-icer. Engineered brackets secure the sprayer to the Gator bed with no tools, or additional tie-downs required.

NOTE: Sprayer shown above with optional 150-in. precision boom (LP22885).

High-performance features:

• 45 psi, 3.6 gpm SHURflo® diaphragm-type pump is designed for high hour applications and can be run dry without damage
• Premium pistol grip spray gun, designed for single hand mist to 35-ft stream
• Equipped with a 20-ft hand wand hose with side mount hose tender for convenience
• Glycerin-filled pressure gauge and TeeJet™ pressure regulation/recirculation valve
• Choice of booms (sold separately)
• On/off capabilities in the palm of your hand with the included sprayer remote control (LP22912)
• 12V plug included with wiring harness, complete with quick-disconnects, for convenient electrical hookup
• Brackets secure to Gator bed, no tools or additional strapping required after initial set-up
• Control valve channels spray to either the boom or spray wand
• Rugged translucent yellow tank with molded fill level indicators (in gallons)

SPECIFICATIONS

ORDERING INFORMATION

Contact the local John Deere dealer for availability and pricing information.

High-performance 45-gal. (170-L) Gator bed sprayer
Order number: LP22908

SHURflo is a U.S.-registered trademark of Sta-Rite Industries, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.

25-gal. (95-L) Gator bed sprayer

The improved 25-gal. (95-L) Gator bed sprayer is designed to work with all steel bed and deluxe cargo box Gator Utility Vehicles (except CX), and provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. It comes complete with a 109-cm (43-in.) boom that sprays a 304.8 cm (120-in.) swath. It is equipped with a 5.8-m (19-ft) hose and a spray wand for spot spraying lawns, shrubs, trees, etc. The fully adjustable brass spray wand tip achieves streams up to 9.1 m (30 ft). Engineered brackets secure the unit to Gator bed with no tools or additional strapping required.

Features include:

• Brackets secure to the Gator bed with no additional strapping or bungees required
• Brackets allow boom height adjustment
• 100 psi Shurflo® diaphragm-type pump is designed for high hour commercial applications – it can be run dry without damage
• The fully adjustable brass spray wand tip achieves streams up to 9.1 m (30 ft)
• Equipped with a 5.8-m (19-ft) hand wand hose
• Check valves in boom tips prevent siphoning and dripping, which can cause lawn spotting
• On/off switch located near operator, 12-V plug included complete with quick-disconnects, for convenient electrical hookup
• Easy boom removal for added convenience
• Control valve channels spray to either the boom or spray wand
• Rugged translucent yellow tank with molded fill level indicators (in gallons)

SPECIFICATIONS

ORDERING INFORMATION

Contact the local John Deere dealer for availability and pricing information.

25-gal. (95-L) Gator bed sprayer
Order number: LP33597

SHURflo is a U.S.-registered trademark of Sta-Rite Industries, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.

25-gal. (94 L) portable sprayer

The 25-gal. (94 L) portable sprayer is ideal for caring for shrubs, decorative trees, and fruit trees.

• Four rubber feet bolted to the bottom of the tank protect and stabilize it when placed in a cart, Gator™, or other vehicle for transporting
• Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30 ft in height
• Handgun comes with a 19-ft hose and a handgun with 14-in. wand

Additional features include:

• 100 psi, 2.1 gpm diaphragm-type pump designed for high-hour commercial applications; it can be run dry without damage
• Spray wand is constructed of non-corrosive polypropylene material with Viton® components for remote spray jobs
• Two-wire fused wiring harness complete with quick-disconnects for convenient electrical hookup
• Large cap to easily fill up the tank
• Rugged translucent yellow tank with molded fill-level indicators (in gallons)

NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).

These liquid sprayers are especially suited for maintaining residential and small commercial properties:

• Provide an excellent way to apply liquid fertilizer
• Herbicides and pesticides can be applied along with liquid fertilizer or separately

Following are the advantages of using liquid fertilizer over dry fertilizer:

• More readily available to plants
• Need not be worked into the soil by watering or rain before it will work
• Herbicides are more effective when applied with liquid fertilizer

NOTE: Use these sprayers with liquid-base lawn care chemicals only. Not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.

Compatible with all Gator models except XUV 550, XUV 550 S4, and RSX850i Utility Vehicles.

ORDERING INFORMATION

Contact the local John Deere dealer for availability and pricing information.

25-gal. (94 L) portable sprayer
Order number: LP19490

90-gal. (340-L) Gator bed sprayer

The 90-gal. (340-L) Gator bed sprayer is designed to work with any Gator model with load capacities of 800 lb or greater. Extreme capacity is great for athletic fields, a farmette, commercial maintenance or any large property. It provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. It comes complete with a 43-in. boom that sprays a 120-in. swath. Engineered brackets secure the sprayer to the Gator bed with no tools, or additional tie-downs required.

Special features:

• 90-gal. (340-L) capacity (custom brackets and plumbing combines two 45-gal. tanks)
• Brackets secure to Gator bed, no tools or additional strapping required after initial set-up
• Brackets allow boom height adjustment
• 2.1 gpm SHURflo® diaphragm-type pump with 100 psi shutoff, can be run dry without damage
• The fully adjustable brass spray wand tip achieves streams up to 30 feet
• Equipped with a 20-ft hand wand hose with side mount hose tender for convenience
• Check valves in boom tips prevent siphoning and dripping, which can cause lawn spotting
• On/off switch located near operator
• 12V plug included with wiring harness for convenient electrical hookup
• Easy boom removal for added convenience
• Control valve channels spray to either the boom or spray wand
• Rugged translucent yellow tank with molded fill level indicators (in gallons)

SPECIFICATIONS

ORDERING INFORMATION

Contact the local John Deere dealer for availability and pricing information.

90-gal. (340-L) Gator bed sprayer
Order number: LP20853

SHURflo is a U.S.-registered trademark of Sta-Rite Industries, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.

340.7-L (90-gal.) single tank sprayer

The high-performance (HP) single-tank 340.7-L (90-gal.) Gator bed sprayer is designed to work with Gator vehicles equipped with the deluxe cargo box that have a capacity in excess of 362.9 kg (800 lb). The custom molded 340.7-L (90-gal.) tank provides a low profile with capacity perfect for athletic fields, farmettes, commercial maintenance, or any large property. It provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. Custom engineered mounting hardware ensures the unit stays secure without the use of additional straps or tie-downs. Cover ground quickly with flexible boom options. (Boom sold separately).

HIGH-PERFORMANCE FEATURES:

• 100 psi, 4-GPM diaphragm-type pump is designed for high-hour applications and can be run dry without damage
• Premium pistol grip spray gun, designed for single-hand mist to 10.7-m (35-ft) stream.
• Side-mount hose tender for easy hose access and storage
• Glycerin-filled pressure gauge
• TeeJet™ pressure regulation/recirculation valve for precise sprayer calibration

ADDITIONAL FEATURES:

• Custom engineered brackets secure to Gator bed with no tools or additional straps
• Control valve channels spray to either the boom or spray wand
• Includes Gator accessory wiring harness, complete with quick disconnects, for convenient electrical hookup
• Rugged translucent yellow tank with molded fill level indicators (in gallons)

GatorPal model GP-2700GH shown – view one

GatorPal model GP-2700GH shown – view two

The GatorPal custom designed washers are designed to exact dimensions of the John Deere Gator™. These belt-driven, industrial-duty units include a water tank and 100-ft hose reel, and are perfect for cleaning in remote or hard-to-access areas where water is not readily available.

Features:

• 196-cc Honda™ OHV engine
• 2700 psi
• 2.4 gpm
• For Gator weight capacities up to 600 lb maximum
• 35-gal. holding tank
• 100-ft hose reel
• Performance-proven engine with low-oil protection
• Belt-drive triplex piston crankshaft pump with ceramic plungers
• Thermal relief valve
• Adjustable pressure
• Forged brass manifold
• Corrosion-resistant aluminum frame and fork-lift-accessible plastic pallet
• Quick-connect nozzles (0, 15, 25 and 40 degree)
• 3/8-in. x 100-ft non-marking hose with quick connects, swivel, and bend restrictors
• 36-in. lance with rubber grip
• Professional-grade insulated trigger gun with safety lock-off
• Two year warranty (five years on pump)

Fits on TX, TH 6×4, HPX, XUV 825i, 825i S4, 855D, and 855D S4 Gators.

Honda is a U.S.-registered trademark of Honda Motor Company.

Ordering information
Please contact your local John Deere dealer for availability and pricing information.

John Deere GatorPal portable high-pressure washer
Order number: LPGP2700GH

GatorPal model GP-2700GH shown

GatorPal model GP-2700GH shown

The GatorPal custom designed washers are designed to exact dimensions of the John Deere Gator™ Utility Vehicle. These belt-driven, industrial-duty units include a water tank and 100-ft hose reel, and are perfect for cleaning in remote or hard-to-access areas where water is not readily available.

Features:

• 196-cc Subaru™ OHV engine
• 2700 psi
• 2.4 gpm
• For Gator weight capacities up to 600 lb maximum
• 35-gal. holding tank
• 100-ft hose reel
• Performance-proven engine with low-oil protection
• Belt-drive triplex piston crankshaft pump with ceramic plungers
• Thermal relief valve
• Adjustable pressure
• Forged brass manifold
• Corrosion-resistant aluminum frame and fork-lift-accessible plastic pallet
• Quick-connect nozzles (0, 15, 25 and 40 degree)
• 3/8-in. x 100-ft non-marking hose with quick connects, swivel, and bend restrictors
• 36-in. lance with rubber grip
• Professional-grade insulated trigger gun with safety lock-off
• Two year warranty (five years on pump)

Fits on TX, TH 6×4, HPX, XUV 625i, 825i, 825i S4, 855D, and 855D S4 Gators.

Subaru is a U.S.-registered trademark of Subaru Motor Company.

Ordering information
Please contact your local John Deere dealer for availability and pricing information.  Mi-T-M direct order.

John Deere GatorPal portable high-pressure washer
Order number: LPGP2700GS

GatorPal model GP-3000GS shown

GatorPal model GP-3000GS shown

The John Deere GatorPal gives the benefits of a gas-powered, high-pressure washer, conveniently mounted in the Gator™ utility vehicle for easy transport to hard-to-reach places.

Features of the GatorPal model GP-3000GH are:

• 9.0-hp Honda® overhead valve (OHV) engine
• 3000 psi
• 3.0 gpm
• For Gator weight capacities up to 1000 lb maximum
• 246.1-L (65-gal.) holding tank
• 30.5-m (100-ft) hose reel
• Performance-proven engine with low-oil protection
• Belt-drive triplex piston AR pump with ceramic plungers
• Thermal relief valve
• Adjustable pressure
• Forged brass manifold
• Corrosion-resistant aluminum frame and fork-lift-accessible plastic pallet
• Quick-connect nozzles (0 degrees, 15 degrees, 25 degrees, and 40 degrees)
• 9.53-mm (3/8-in.) x 30.5-m (100-ft) non-marking hose with quick connects, swivel, and bend restrictors
• 914.4-mm (36-in.) lance with rubber grip
• Professional-grade insulated trigger gun with safety lock-off

Honda is a trademark of Honda Motor Company.

Ordering information
Please contact your local John Deere dealer for availability and pricing information.

GatorPal portable high-pressure washer – 9 hp Honda engine
Order number: LPGP3000GH

GatorPal model GP-3000GS shown

GatorPal model GP-3000GS shown

The John Deere GatorPal gives the benefits of a gas-powered, high-pressure washer, conveniently mounted in the Gator™ utility vehicle for easy transport to hard-to-reach places.

Features of the GatorPal model GP-3000GS are as follows:

• 9-hp Subaru® overhead valve (OHV) engine
• 3000 psi
• 11.4 L/m (3.0 gpm)
• For Gator weight capacities up to 1000 lb maximum
• 246.05-L (65-gal.) holding tank
• 30.5-m (100-ft) hose reel
• Performance-proven engine with low-oil protection
• Belt-drive triplex piston AR pump with ceramic plungers
• Thermal relief valve
• Adjustable pressure
• Forged brass manifold
• Corrosion-resistant aluminum frame and fork-lift-accessible plastic pallet
• Quick-connect nozzles (0 degrees, 15 degrees, 25 degrees, and 40 degrees)
• 9.53-mm (3/8-in.) x 30.5-m (100-ft) non-marking hose with quick connects, swivel, and bend restrictors
• 914.4-mm (36-in.) lance with rubber grip
• Professional-grade insulated trigger gun with safety lock-off

Subaru is a trademark of Fuji Heavy Industries Limited.

Ordering information
Please contact your local John Deere dealer for availability and pricing information.

GatorPal portable high-pressure washer – 9 hp Suburu engine
Order number: LPGP3000GS

Shown on TH 6×4 with HP 45-gal. Sprayer

The standard Gator boom is compatible with all Gator sprayer models and is sold separately for the HP Gator sprayers. This fixed boom is conveniently sized at 43 in. (1.1 m) and does not extend wider than the Gator bed, but it is perfect for covering ground quickly and thoroughly with a 120-in. (3-m) spray swath.

The boom is ideal for basic spraying application. Three tips and check valves round out this offering (boom only, mounting brackets are provided with sprayers).

BOOM FEATURES:

• 43-in. (1.1-m) boom with three tips
• Check valves prevent siphoning and dripping
• Sold separately for:
  • HP 45-gal. Gator Bed Sprayer
  • HP 90-gal. Gator Bed Sprayer
  • HP 45-gal. Gator Bed Sprayer – XUV 550

Shown on TH 6×4 with HP 45-gal. Sprayer

Shown on TH 6×4 with HP 45-gal. Sprayer

The 150-in. (3.81-m) precision boom is compatible with the HP sprayers. This folding boom is made to cover ground quickly and thoroughly with five precision spray tips, TeeJet™ nozzle bodies and commercial grade diaphragm check valves. The outer tips offer versatility with built-in shut offs to allow an adjustable 90-in. (2.3-m), 120-in. (3-m), or 150-in. (3.8-m) spray swath.

150-IN. (3.8-M) PRECISION BOOM FEATURES:

• Folding spring hinge
• Breakaway design
• Five TeeJet tips and nozzle bodies
• Adjustable spray swath (90 in., 120 in., 150 in.)
• 1/2-in. industrial-grade rubber hose
• Designed to work with
  • HP 45-gal. Gator™ Bed Sprayer
  • HP 90-gal. Gator Bed Sprayer
  • HP 45-gal. Gator Bed Sprayer – XUV 550

TeeJet is a registered trademark of Spraying Systems Company.

Shown on TH 6×4 with HP 90-gal. Sprayer

HP 90-gal. Sprayer

The 24-ft (7.3-m) boomless spray nozzles are compatible with all HP sprayers. This boom is perfect for covering ground quickly and thoroughly with a 24-ft (7.3-m) spray swath. It is ideal for uneven terrain or where precision spray application is not necessary. TeeJet™ nozzle bodies and commercial grade diaphragm check valves round out this offering.

BOOMLESS SPRAY NOZZLES FEATURE

• Three TeeJet tips and nozzle bodies
• Commercial-grade diaphragm check valves
• 1/2-in. (12.7-mm) industrial-grade rubber hose
• Designed to work with all HP sprayers :
• HP 45-gal. Gator™ Bed Sprayer
• HP 90-gal. Gator Bed Sprayer
• HP 45-gal. Gator Bed Sprayer – XUV 550

TeeJet is a registered trademark of Spraying Systems Company.

45-gal. (170- L) Tow-Behind Sprayer

The HP 45-gal. (170-L) Tow-Behind Sprayer offers the ultimate in performance and versatility. With a 45-gal. capacity, high volume electric pump, and premium pistol grip spray gun, it provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray and deicer. It is the perfect match for the customer who wants extreme performance.

The heavy-duty frame rolls smoothly on 15×6 tires that minimize ground compaction and have a low profile, which maintains a low center of gravity for excellent stability. Cover ground quickly with flexible boom options; a 150 in. (3.8 m) precision folding, 120-in. (3-m) standard three tip, 24-ft (7.3-m) boomless, or no boom at all (boom sold separately).

HP FEATURES:

• 45 psi, 3.6 gpm SHURflo® diaphragm-type pump is designed for high hour applications and can be run dry without damage
• Premium pistol grip spray gun, designed for single hand mist to 35 ft (10.7 m) stream
• Front-mount hose tender for easy hose access and storage
• Glycerin filled pressure gauge
• TeeJet™ pressure regulation/recirculation valve
• Includes sprayer remote control

ADDITIONAL FEATURES

• Easy boom removal for added convenience
• Control valve channels spray to either the boom or spray wand
• Rugged translucent yellow tank with molded fill level indicators (in gal.)

BOOM OPTIONS (SOLD SEPARATELY):

• 150-in. (3810-mm) precision spray boom
• 24-ft  (288-in.) boomless spray nozzles

SHURflo is trademark of SHURflo, LLC. TeeJet is a registered trademark of Spraying Systems Company.

45-gal. (170-L) tow-behind sprayer

The 45-gal. (170-L)  trail-type sprayer is equipped with a boom that sprays a wide, 120-in. width.

• Three nozzles for efficient broadcast spraying
• Boom folds up against the tank for storage

A 20-ft hose and handgun are provided.

• The 20-ft hose and handgun are helpful when spraying trees or other remote areas that cannot be reached with the sprayer itself
• A 14-in. wand on the handgun is standard equipment

The heavy-duty frame rolls smoothly on 15×6 tires that minimize ground compaction.

• Low center of gravity gives excellent stability
• Equipped with a 4-position hitch
• Rear of the frame is designed so the sprayer will stand upright during storage to reduce the amount of space required

Additional features include:

• Diaphragm-type pump designed for high-hour commercial applications; it can be run dry without damage
• The spray wand is constructed of non-corrosive polypropylene material with Viton® components for remote spray jobs
• Two-wire fused wiring harness complete with quick-disconnects for convenient electrical hookup
• Large cap to easily fill up the tank
• Control valve to channel the spray to the boom or handgun
• Rugged translucent yellow tank with molded fill-level indicators (in gallons)

SPECIFICATIONS

ORDERING INFORMATION

Contact the local John Deere dealer for availability and pricing information.

45-gal. (170-L) tow-behind sprayer
Order number: LP20485

SHURflo is a U.S.-registered trademark of SHURflo, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.

17AT Cart

• 17-ft ³ capacity
• 1000-lb load limit
• Copolymer polypropylene is compression molded for optimum thickness in all areas and maximum durability
• Heavy-duty, reinforced structural frame with a 25.4-mm (1-in.) diameter, one-piece axle to handle weight, speed, and bumps
• Spring-loaded dump latch for easy dumping and positive lock to prevent accidental unlocking when being towed
• Double-sealed, high-speed roller bearings to handle a 48-km/h (30-mph) maximum speed
• Heavy-duty polyethylene bed
  • Accepts dividers to separate cargo (template included)
• All-terrain knobby tires
  • Provides good flotation and traction in mud, sand, and other wet or soft areas
  • Flexes over bumps and ruts for a smoother, more controlled ride
  • Minimizes ground compaction to save turf and prevent ruts in soft ground
• Poly fenders to keep the operator, cart, and vehicle clean
• Suitable for use with most John Deere utility vehicles equipped with a 48-mm (1-7/8-in.) ball hitch, including Gator™ Utility Vehicle models TX, TX Turf, TH 6×4, TH 6×4 Diesel, all HPX 4×4 models, and all XUV models
• Quality and styling compatible with other John Deere equipment

ORDERING INFORMATION

Contact the local John Deere dealer for availability and pricing information.

17AT Cart

Order number: LPPCT17ATJD

Fertilizer spreader

The Gator™ electric fertilizer spreader is the ideal solution for medium to large size jobs. This unit is engineered to fit heavy-duty XUV Gator Utility Vehicles and designed with a versatile hitch mechanism (sold separately) that allows quick and secure attach/detach capability for easy bed access or switching to a Gator salt spreader. Convenience is at the operator’s fingertips with an electronic variable-speed spinner and electronic gate control from the Gator seat. Adjustable flighting allows spread pattern control to make sure the material is applied where it is needed.

Features:

• Powder-coated steel frame
• Electronic variable-speed spinner
• Electrically actuated control of the flow gate
• 10-in. (25.4-cm) diameter spinner is stainless steel with adjustable flighting to control spreader pattern
• 8:1 ratio with bronze gear, grease filled
• Motor is 1/3 hp, 12-V DC, semi sealed

The mounting hitch and control box are sold separately, available through Order Zone.

Ideal for:

• Granular fertilizer
• Seed
• Granular pesticide
• Granular herbicide

Capacity:

• Volume: 3.0 cu ft (0.1 cu m)
• Weight: 240 lb (108.9 kg)
• Spreading width: up to 20 ft (6.1 m)

Includes:

• Side deflector

Compatibility:

• Compatible with all model year 2011 to current heavy-duty Gator XUV 625i, 825i, 825i S4, 855D, and 855D S4 Utility Vehicles.
• Compatible with all XUV560 and XUV560 S4 Utility Vehicles.
• Gator XUV 620i and 850D Utility Vehicles and XUV 625i, 825i, and 855D Utility Vehicles pre model year 2011 must purchase the Gator hitch-mounting brackets, sold separately through Order Zone.

Ordering information

Available through Order Zone. Contact the local John Deere dealer for availability and pricing information.

Salt spreader

The Gator™ electric salt spreader is the ideal solution for medium to large size jobs. This unit is engineered to fit heavy-duty XUV Gator vehicles and designed with a versatile hitch mechanism (sold separately) that allows quick and secure attach/detach capability for easy bed access or switching to a Gator fertilizer spreader. The Gator salt spreader features an electric-driven auger for consistent salt presentation to the spinner. It draws power from the Gator vehicle, so no external power source is needed. It is powered by a variable-speed controller (sold with hitch) for precise spread pattern control.

Features:

• Powder-coated steel frame
• Spinner motor controlled using the vehicle’s 12-V system
• 10-in. (25.4-cm) diameter spinner is nylon/glass reinforced resin for ultimate corrosion resistance
• 5:1 ratio with bronze gear, grease filled
• Motor is 1/3 hp, 12-V DC, semi sealed

The mounting hitch and control box are sold separately. Available through Order Zone.

Ideal for:

• Salt and large granular materials

Capacity:

• Volume: 3.0 cu ft (0.1 cu m)
• Weight: 240 lb (108.9 kg)
• Spreading width: Up to 20 ft (6.1 m)

Compatibility:

• Compatible with all model year 2011 to current heavy-duty XUV 625i, 825i, 825i S4, 855D, and 855D S4 Utility Vehicles.

• Compatible with all Gator XUV560 and XUV560 S4 Utility Vehicles.

Gator XUV 620i and 850D Utility Vehicles and XUV 625i, 825i, and 855D Utility Vehicles pre model year 2011 must purchase the Gator hitch mounting brackets, sold separately through Order Zone.

Ordering information

Available through Order Zone. Contact the local John Deere dealer for availability and pricing information.

0.14-m3 (5-ft3) drop spreader

The Gator™ Drop Spreader features heavy-gauge stainless steel construction along with stainless-steel fasteners for exceptional durability in harsh conditions. The segmented rotor accurately meters material and evenly distributes material across the drop width. An industry-exclusive removable rotor tray allows for quick and easy clean out. Ideal for spreading large granular materials (such as rock salt). The 109-cm (43–in.) width is ideal for sidewalks and is suited well for snow and ice contractors, colleges and universities, hospital and health campuses, municipalities and schools, retirement home campuses, etc.

FEATURES:

• Industry-exclusive removable rotor tray that simplifies cleanout and serviceability.
• No tools required to remove or install the rotor tray.
• Segmented stainless-steel rotor for accurate metering of material.
• Operator-controlled vibration motor to eliminate bridging of material.
• Rubber isolator mounts dampen tray vibration when operating vibration motor.
• Remotely mounted control box for power, vibration control, and variable rotor speed control (supplied with required Gator hitch and control package).
• Drivetrain is fully encased in stainless-steel shielding.
• Simplistic rotor drive with slotted chain adjustment plate.
• Six-position gate adjusts from fully closed to 38.1-mm (1 1/2–in.) clearance to meter a wide variety of products. Gate position can be adjusted without using tools.

SPECIFICATIONS:

• Volume: 5.0 ft³ (0.14 m³)
• Weight empty: 191 lb (87 kg)
• Weight full: 540 lb (245 kg)
• Spreading width: 43 in. (109 cm)

Spreader hitch assembly

The Gator™ hitch and electric control box for the salt/fertilizer spreader is engineered to fit your heavy-duty XUV Gator Utility Vehicles. This spreader hitch frame is designed with a versatile spring loaded mechanism to allow quick and secure attach/detach capabilities of your spreader. The hitch can easily be lowered, by the use of spring loaded pins, allowing the cargo box to be tilted.

Frame features:

• Powder-coated steel frame
• Spring-loaded easy hitch and release
• Lowers for easy bed access, dumping, and engine access

The electronic control box is designed to operate both the Gator fertilizer and salt spreader. The fully electronic control box accommodates a variable speed spinner control for both spreaders, and electronically actuated gate control for the fertilizer spreader. The weather-resistant box includes the switches, wiring and hardware for convenient dash mounting, allowing full control from the seat of the Gator.

Control box features:

• In-cab dash mount control box
• Variable speed control for spread width adjustment
• Electronically actuated gate controls on fertilizer spreader
• Sealed for weather resistance
• Large dial for spinner speed and gate control

Includes:

• Spreader hitch frame
• Electronic control box and wiring

Compatibility:

• Compatible with all model year 2011 to current heavy-duty XUV 625i, 825i, 825i S4, 855D, and 855D S4 Utility Vehicles.
• XUV 620i and 850D Utility Vehicles and XUV 625i, 825i, and 855D Utility Vehicles pre model year 2011 must purchase the Gator hitch-mounting brackets, sold separately through Order Zone™.

Ordering information

Available through Order Zone. Contact the local John Deere dealer for availability and pricing information.

Deluxe Gator gear organizer (shown in black)

Increase and organize cargo box capacity with the soft, weather-protective deluxe Gator gear organizer. The organizer installs easily on the load guard directly behind the operator’s station. It is compatible with Gator Utility Vehicles equipped with the all-new deluxe cargo box.

Compatible with all model year 2011 – current Gator XUV 625i, XUV 825i, XUV 855D, TX, TX Turf, TH 6X4, TE, M-Gator™ A2, and M-Gator A3 Utility Vehicles.

Compatible with all model year 2013 – current Gator XUV 825i S4 and XUV 855D S4 Utility Vehicles.

Ordering information
Please contact your local John Deere dealer for availability and pricing information.

Deluxe Gator gear organizer – Camo
Order number: LP19877

MOLLE OPS storage panel

Available through OrderZone

Special features:

• Military-grade mounting hardware included
• Fits device and utility pouches
• Carries up to 30 lb (13.6 kg) of gear
• Constructed with military-grade Cordura™ fabrics
• Utilizes the MOLLE attachment system
• Available in black or REALTREE HARDWOODS HD™ pattern
• Limited 1-year warranty
• Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

OPS organizer

OPS organizer detail

One-piece design easily attaches to OPS

• Four small cargo compartments, one large cargo compartment, two beverage holders, and two cell phone holders for more storage
• Heavy-weight polyester fabric for maximum durability and resistance to tear
• PVC coated for maximum water resistance and repellency
• One-piece design easily attaches and detaches to the operator protection system (OPS) with four straps—no tools required
• Compatible with the following models:
  • Gator™ HPX 4×4, HPX 4×4 Diesel, HPX 4×4 Trail, XUV 620i, and XUV 850D Utility Vehicles (with OPS only)
  • Model year 2011 Gator XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles (with OPS only)
  • Gator XUV 825i S4 and XUV 855D S4 Utility Vehicles
• Compatible with the OPS rear screen, OPS soft roof, and OPS poly roof

ORDERING INFORMATION

Contact your local John Deere dealer for availability and pricing information.

OPS organizer
Order number: LP93117

Rapid recovery rope kit

Available through OrderZone

Special features:

• Extreme off-road kinetic recovery rope and storage bag
• Rope measures 9/16 in. (21 mm) X 20 ft (6.1 m) and is constructed of double-braided nylon
• 5,000-lb (2268-kg) tensile strength
• Bag is constructed with military-grade Cordura™ fabrics with built-in carry handle
• Bag utilizes the modular lightweight load-carrying equipment (MOLLE) attachment system with two 6–in. (152.7-mm) MOLLE sticks included
• Bag available in black or REALTREE HARDWOODS HD™ pattern
• Limited 1-year warranty
• Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

Rapid recovery rope kit

Available through OrderZone

Special features:

• Extreme off-road kinetic recovery rope and storage bag
• Rope measures 9/16 in. (21 mm) X 20 ft (6.1 m) and is constructed of double-braided nylon
• 5,000-lb (2268-kg) tensile strength
• Bag is constructed with military-grade Cordura™ fabrics with built-in carry handle
• Bag utilizes the modular lightweight load-carrying equipment (MOLLE) attachment system with two 6–in. (152.4-mm) MOLLE sticks included
• Bag available in black or REALTREE HARDWOODS HD™ pattern
• Limited 1-year warranty
• Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

Side-door opening toolbox

This custom toolbox was specifically designed for users desiring more integrated sealed storage in a cargo box.

Side-door opening toolbox features:

• 125-L (33-gal.) sealed storage
• Heavy-gauge sheet metal
• D-rings for tie downs
• Fully sealed lockable latch
• Sealed door
• Door can also be used as a work bench when down
• Can be mounted on either side of the cargo box

The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate, and bolting the toolbox onto the cargo box.

The toolbox requires the tailgate with brake and tail lights kit (BM26161) and optional label kit:

• BM26220 – green and yellow
• BM26218 – olive and black
• BM26219 – camo

This toolbox is compatible with the following Gator™ Utility Vehicle models:

• TX
• TX Turf
• TE
• TH
• XUV625i
• XUV825i
• XUV825i S4
• XUV855D
• XUV855D S4

Shown assembled to OPS

Features of the soft rear screen and organizer:

• Instant shield against wind back draft, rain, and weather
• Protects against the worst winter weather
• Five mesh zippered cargo pockets for tools and gear
• Quickly attaches to the OPS with rip-and-grip straps
• Clear PVC window framed with heavy-duty fabric
• Cell phone or small gear holder
• Two large zippered compartments
• Two beverage pockets
• Stows all your essentials behind the seats
• Rolls up for storage

Compatible with: HPX, XUV 825i, XUV 825i S4, XUV 855D, and XUV 855D S4 Series Gator™ Utility Vehicles equipped with an occupant protection system (OPS).

Ordering information
Contact the local John Deere dealer for availability and pricing information.

Soft rear screen and organizer – black
Order number: LP93207

Top-door opening toolbox

This custom toolbox was specifically designed for users desiring more integrated sealed storage in a cargo box.

Top door opening toolbox features:

• 125-L (33-gal.) sealed storage
• Heavy-gauge sheet metal
• D-rings for tie downs
• Fully sealed lockable latch
• Sealed door
• Toolbox divider
• Removable tool tray
• Can be mounted on either side of the cargo box

The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate, and bolting the toolbox onto the cargo box.

The toolbox requires the tailgate with brake and tail lights kit (BM26161) and optional label kit:

• BM26220 – green and yellow
• BM26218 –olive and black
• BM26219 – Camo

This toolbox is compatible with the following Gator™ Utility Vehicle models:

• TX
• TX Turf
• TE
• TH
• XUV625i
• XUV825i
• XUV825i S4
• XUV855D
• XUV855D S4

View of front Fox Shocks

Overhead view of rear Fox Shocks

Fox Shocks offer the ability to tune the quality of the ride by adjusting the compression damping of the shock for aggressive operation or heavy load compensation. The ride tuning is accomplished by rotating a knob located on the remote reservoir on each shock. These shocks also offer the benefit of being rebuildable. All shocks have a finite life based on the quality of the oil; the shear properties of the oil break down over time, losing their damping characteristics. Fox Shocks offer the ability to replace the oil and re-lube the sealing surfaces to ensure optimum performance throughout the life of the shock.

Remote reservoir with adjustability

Compression damping adjustment

Parts included in Fox Shocks suspension kit

Additionally, Fox Shocks also offer larger bodies with remote reservoirs. These larger shocks hold more oil which dissipates heat much more efficiently, therefore preventing the loss of performance during hard driving sessions; this results in a more consistent ride. If the shock, for whatever reason, does not perform to the level of the operators expectation, they can be custom tuned directly by Fox Racing to achieve the desired suspension characteristics.

Compatible with all Gator™ XUV 625i, XUV 825i (not S4), XUV 855D, and M-Gator™ A2 and A3 Utility Vehicles.

Fox is a U.S.-registered trademark of Fox Factory Inc.

Gator track system

Play, work, and explore in all four seasons. Wheeled utility vehicles get buried very quickly in deep snow, swamps, sand, or muddy ground conditions. Adding a Camoplast® Tracks System will improve floatation and traction and will take you where wheels simply cannot go. Get true four-season capability without compromising winter performance with Camoplast track kits. Installed easily in one hour. And when the snow goes, switch back to wheels in an hour or less.

Camoplast has the only system on the market with anti-rotation on the rear spring that allows the rear of the track to swing upwards to climb on top of any difficult surface.

The fusable link on the anti-rotation system is designed to take the impact of every bump, jolt, and crash to prevent damaging your vehicle.

Drive sprockets designed specifically for use on the XUV.

Benefits of tracks include:

• All seasons capability – ideal for snow, mud, and marsh
• Easy steering – front radius track shape and carriage
• Increased vehicle stability while increasing ground clearance
• Drive sprockets matched to engine displacement

NOTE: Not compatible with standard straight blade, v-blade, front fender guards, rear bumper, and rear fender guards.

ORDERING INFORMATION

Contact the local John Deere dealer for availability and pricing information.

Gator track system for XUV 855D
Order number: LP40897

Camoplast is a U.S.-registered trademark of CAMOPLAST Inc.

Turn signal light harness kit

The turn signal light harness kit is required when installing the turn signal light kit.

The kit includes the switches and wire harnesses.

Compatible with Gator™ HPX, XUV560, XUV550, XUV590i, XUV590i S4, XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles.

Front turn signal

The turn signal light kit includes the front turn signals and controls. The controls can be used to operate four-way flashers and/or rear turn signals. The switches mount in the dash of the vehicle. Also requires turn signal light harness kit.

NOTE: Not intended for use on public roadways.

• Compatible with all model year 2011-current Gator™ XUV825i and XUV825i S4 Utility Vehicles
• Compatible with all model year 2011-current Gator XUV625i, XUV855D, and XUV855D S4 Utility Vehicles equipped with the 3006 option code for the deluxe cargo box which includes the brake and tail lights.

Warn winch – side view (bumper mount)

This strong, 12VDC winch has an impressive pulling capacity of  3500 lb (1588 kg). It is equipped with a water-resistant contactor that supplies the amperage required for higher pulling capacities.

The winch has a 10-ft (3.0-m) lead and water-resistant remote for safe-distance operation that plugs directly into the glove box. It also comes with a four-way roller fairlead to minimize wire abrasion and pulling resistance.

The winch also requires either the bumper mount kit or receiver mount kit, depending on where you want to mount the winch.

WARN ProVantage 3500-lb. winch and winch kits are only compatible with model year 2011 to current XUV 625i, 825i, 825i S4, 855D, 855D S4.

Features

• 3500-lb (1588-kg) rated pull
• 50 ft (15.25 m) of 3/16-in. (4.8-mm) wire rope with roller fairlead
• Corded remote that plugs directly into glovebox for easy operation
• Three-stage, heat-treated, planetary gear train for smooth, efficient operation
• Ergonomic clutch handle
• Patented roller disc brake for outstanding control while winching
• Fully sealed motor and drive train to keep the elements out
• All-metal gear housing and gears
• Warranty: Limited lifetime, three-year electrical (North America)

Warn is a registered trademark of Warn Industries, Inc.

Warn 4500-lb (2041-kg) winch

This strong, 12VDC winch has an impressive pulling capacity of 4500 lb (2041 kg). It is equipped with a water-resistant contactor that supplies the amperage required for higher pulling capacities.

The winch has a 3.0-m (10-ft) lead and water-resistant remote for safe distance operation that plugs directly into the glove box. It also comes with synthetic rope and a hawse fairlead to minimize rope abrasion and pulling resistance.

The winch also requires the mumper mount kit (sold separately). Receiver mount not available.

WARN ProVantage 4500-lb. (2041-kg) winch and winch kits are only compatible with model year 2014 to current XUV 625i, 825i, 825i S4, 855D, and 855D S4.

Features

• 4500 lb (2041 kg) rated pull
• 50 ft (15.25 m) of 7/32-in. (5.6-mm) synthetic rope with hawse fairlead
• Corded remote that plugs directly into glovebox for easy operation
• Three-stage, heat treated, planetary gear train for smooth, efficient operation
• Ergonomic clutch handle
• Patented roller disc brake for outstanding control while winching
• Fully sealed motor and drive train to keep the elements out
• All-metal gear housing and gears
• Warranty: Limited lifetime, three-year electrical (North America)

Warn is a registered trademark of Warn Industries, Inc.

Winch accessories kit

Double the pulling power, change the pulling direction, and keep the winch in proper working order.

The accessories kit is essential gear for operators getting the most out of their winch:

• Effectively anchors to trees/boulders
• Change the pulling direction
• Double the pulling capacity

The accessories kit includes:

• Flexible tree strap
• Snatch block
• Shackle

Each kit comes in a black Cordura® heavyweight-nylon soft case.

Cordura is a trademark of INVISTA.

Bumper mount (winch not included)

The bumper mount kit includes all of the necessary wire harness, contactor mounts, and hardware to be able to mount the WARN® ProVantage 3500-lb (1588-kg) winch (sold separately) to the front bumper of the Heavy-Duty XUV.

Compatible with model year 2011 to current XUV 625i, 825i, 855D Gater™ Utility Vehicles.

Warn is a registered trademark of Warn Industries, Inc.

Receiver mount (winch not included)

The receiver mount kit includes all of the necessary wire harness, contactor mounts, winch carrier, and hardware to be able to mount the WARN® ProVantage 3500-lb (1588-kg) winch (sold separately) to the front or rear receiver of the Heavy-Duty XUV.

Compatible with model year 2011 to current XUV 625i, 825i, 855D Gator™ Utility Vehicles.

Warn is a registered trademark of Warn Industries, Inc.

The bumper mount kit includes all of the necessary wire harness, contactor mounts, and hardware to be able to mount the WARN® ProVantage 4500-lb (2041-kg) winch (sold separately) to the front bumper of the heavy-duty XUV models.

Compatible with model year 2014 to current XUV 625i, 825i, and 855D Gator™ Utility Vehicles.

Protective window and essential organizer all in one

Features:

• Heavy-duty fabric coated for maximum water resistance and repellency
• Quickly attaches to the OPS with rip-and-grip straps
• Stows all essentials behind the seat
• Multiple pockets for added storage
• Super-clear vinyl windows are cold crack tested to -20°C
• Rolls up for storage
• Two-year warranty

Ordering information:
Available through Order Zone. Contact the local John Deere dealer for availability and pricing information.

OPS rear screen on Gator™ XUV 825i (front view)

OPS rear screen on Gator XUV 825i S4 (rear view)

Product attributes

• Provides additional protection to the operator and passenger
  • NOTE:  Never carry loads in cargo box over load guard
• Includes headrests for additional comfort with the bench and bucket seats
• Perforated, black metal screen easily attaches to the side and upper tubes of the OPS with four quick clamps
• Compatible with the following models:
  • HPX: Model year 2013-current
  • XUV 625i:  Model year 2013-current
  • XUV 825i and 825i S4:  Model year 2013-current
  • XUV 855D and 855D S4:  Model year 2013-current
• Not compatible with pre-model year 2013 HPX and XUV’s, including 620i and 850D

Windshield kit

The windshield kit includes:

• Premium-grade glass windshield and mounting hardware
• Windshield wiper and mounting assembly
• Commercial-grade gas shocks provide effortless one-hand opening/closing

The kit provides a complete automotive seal around the cab frame and possesses three positions for operation and under-the-hood service.

It is compatible with the following vehicles:

• All Gator™ HPX Gas, HPX Diesel, XUV 620i, XUV 850D, XUV 625i, XUV 825i, and XUV 855D Utility Vehicles when equipped with a deluxe cab frame

Abrasion-resistant half windshield

The abrasion-resistant half windshield features:

• Quick-clamp mounting system – tool-free installation and removal in seconds
• Manufactured from super-premium, two-sided Makrolon® AR grade abrasion-resistant polycarbonate
• Increased ultraviolet (UV) longevity – resists yellowing longer than optical-grade polycarbonate
• Increased chemical resistance over traditional optical-grade polycarbonate
• Almost as hard as glass with greater impact strength

Makrolon is a trademark of Bayer Aktiengesellschaft.

Glass windshield with wiper

Glass windshield with wiper (vent open)

Required operator protection system (OPS) switch bank

The glass windshield with wiper features:

• Quick-clamp mounting system – easy installation and removal in seconds
• Laminated, E-Mark glass
• The lower section of the windshield seals nicely against the vehicle’s hood to protect occupants from the harshest of elements, it also flips up and secured by rubber straps to allow increased airflow into the passenger area

Requires OPS switch bank (sold separately) to mount switch

Reservoir bottle

Spray nozzle

Overhead-mounted on/off rocker switch

Especially useful for working around properties and job sites, the windshield washer kit includes these components:

• Mounting bracket
• Hardware
• Spray nozzle
• Large reservoir with electric pump, harness, and hose

The reservoir assembly bolts to the bottom right rear of the cab frame. A convenient overhead-mounted on/off rocker switch controls the windshield wiper and washer fluid. As with all Gator electrical kits, the washer kit ties into the vehicle’s wiring harness for quick installation.

Compatible with the following vehicles:

• All Gator model year 2011-current XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles

Reservoir bottle

Spray nozzle

Especially useful for working around properties and job sites, the windshield washer kit includes these components:

• Mounting hardware
• Spray nozzle
• Large reservoir with electric pump, harness, and hose
• Three-position backlit rocker switch: off, wiper, washer

The reservoir assembly bolts to the frame. A convenient three-position rocker switch controls the windshield wiper and washer fluid. As with all Gator™ Utility Vehicle electrical kits, the washer kit ties into the vehicle’s wiring harness for quick installation.